Support
Having problems with HyperSpin? You've come to the right place!
4,037 topics in this forum
-
- 4 replies
- 197 views
Ive been messing around with this for a while tonight. Is there a way to just keep the special art on all the time with no fade in or out or delay? I just wanna see the xbox button layout all the time. Thanks
Last reply by snstay, -
- 1 reply
- 207 views
Not in any order - making sure the emulator and game works on its own before trying to use it in RL (RocketLauncher) or HS (HyperSpin) - read the module notes to make sure the version of the emulator is supported and they have the proper settings - don't use ROM sets other than NoIntro (a lot of renaming is needed then) - don't use HS without RL (HL (HyperLaucher) is outdated and will have less support)) - you need to use a xpadder or joytokey to get "everything" in most cases - do you have the BIOS files for the emulator if needed - don't update RLUI (RocketLaucherUI) unless needed (once you get things setup don't mess with them unless your need to and want to …
Last reply by diskmach, -
- 1 reply
- 171 views
Hi guys, All my games are present when I audit them but won't launch in RL or show in hyperspin. SEGA model 2 emulator being used. Anyone any ideas ? Thanks in advance
Last reply by bhoyo, -
- 2 replies
- 189 views
So I was trying to become a little more knowledgeable when it comes to the actual functionality of the paths for artwork and stuff. So i got some questions for you Pros. 1) How do you know what artwork folder does what? For example some of them are disc images and they spin. Some are box images and some are in the middle of the screen. 2) How do you know how the artwork is categorize or path'd other than guess and checking? Like some of my box art goes in Artwork4 folder. But other systems might be put in like Artwork1 or Artwork2? Why is that? Instead of like all box art be put in Artwork4? 3)Are their Layers of art? Like are there multiple folders bc each fo…
Last reply by TheMadHatter, -
- 2 replies
- 172 views
Hello all. First time installer, followed instructions and have RL and HS "working." Tried to load my first emulator (mame) and ROM (1943) but can't pass the rocket test and it fails to play in HS. I get the following error upon exiting HS..... There was an error waiting for the window "ahk_class MAME". Please check you have the correct version emulator installed for this module, followed any notes in the module, and have this emulator working outside your Frontend first. Also turn off Fade to see if you are hiding your problem. I'm at a total loss. Can anyone help? Thank you in advance. I'm new to all this so forgive me if I'm not posting this corr…
Last reply by jasonm001, -
- 1 reply
- 124 views
hi guys i know this has probably been asked but ive searched and cannot find the solution, when i try and load a game, lets say atari 500 as ive got it all set up, it comes up saying cannot find genre.xml .. can anyone please help me out with this? im complete newbie and only started trying to use hyperspin a few days ago .. thanks in advance :-)
Last reply by Waynoski, -
- 0 replies
- 157 views
im having a problem with the mame theme in hyperspin...... when i turn on hyperspin my street fighter theme shows and when i scroll the the emulators the theme fades out like it suppose to, until i stop on which emulator i want to use.....then when i click on mame it appears with the theme, but it covers the wheel.......no fading out or anything, just stays on top.....i even removed each theme i tried (which left me with a black background and my videos dissapeared)......so the videos only work when theres a theme installed......isn't there a way to send my theme to the background or fade out when i scroll through my games!!! somebocy help
Last reply by jchavis444, -
- 1 reply
- 185 views
I dont know if this is possible but is there a way to point the mame wheel art to each of the classic systems? Kind of like how you can point the mame videos to each of them.
Last reply by kylecp1979, -
- 7 replies
- 186 views
Im using ghutch92's startup script and it's been working fine, now it works fine in the main menu and let's me select the systems but when I try to select a game the button for select stops responding, how should I go about finding the fault
Last reply by Rincewind, -
- 1 reply
- 650 views
I have demule .7 I have some games that are not compatible with VGA. I have to switch it in rocketlauncher to RGB. I was wondering if there is away to switch them all to RGB or does anyone have a list of all the ones that need switched over to RGB?
Last reply by kylecp1979, -
- 4 replies
- 179 views
Hey all and thanks for reading..after endless hours of work, i have a hyperspin system i am happy with. so ive begun transferring my hyperspin system across a few pcs to use for projects...They all work, but one pc i have, running windows 7 64 bit, is running everything fine, but whenever i load ANY rom on any system, i only get a black screen.. the sound plays, i can insert coins/use inputs.. but just black screen..Systems with bezels show the bezels and backround, but the game screen remains black..Im using mame and mess for everything else. im assuming its some type of global setting? Ill post my log, but that just shows normal operation.. any other file i can include…
Last reply by aldub516, -
- 2 replies
- 197 views
I was wondering if it was possible to have a wireless xbox 360 pad to not shut off automatically after a period of time.
Last reply by kylecp1979, -
- 5 replies
- 177 views
Dear all, I'm french, it's the firstime I post something here, it's because I'm totally lost and you are my last chance with hyperspin. I used to have hyperspin on an old computer and it works great. I get a new one more powerfull and it's complicated. The old one was on win xp and the new on windows 7. I installed the same things (emulators, thème, etc...), I configured the linls (roms path etc...) All emutors works out of hyperspin with this computer. I tested hyperlaunch and it works also. My problem is that when I launch Hyperspin, I have all systems in the first wheel but that's all. I can't enter in any wheel, I push the return button to enter the subwheel of…
Last reply by Leemon, -
- 3 replies
- 146 views
Hi Guys, I hope I'm not repeating but I couldn't find this question or an answer to it. I have added an artwork 3 to my theme but the stock images I have are a little big. Can I specify in the theme.xml what size I require? example: <artwork3 x="430" y="100"w="180" h="180" time="0.7" delay ="0" type="ease" start="right" rest="none"/> I see the video can be sized but Im having no luck resizing the image with the above. Any help greatly appreciated. Davie. PS Id be loathe to resize the images
Last reply by fenster89411, -
- 1 reply
- 159 views
Sorry to repost this but I think this is the section I should have posted in to start with and I only got one response after a long while so hoping someone can help in this thread. I am using a minipac and just got my control panel build for an arcade. I tested things out last night and I noticed that my player 2 joystick has no keyboard delay on it compared to player 1. When using the player 2 controls to navigate through the wheels... it occasionally skips two or three wheels. If you push it down and hold it, it instantly starts spinning through the wheels vs player 1 which waits a second or two before actually starting to spin through the wheels. I have tested …
Last reply by bluelight, -
- 2 replies
- 156 views
Hi guys i've downloaded some 3d boxart for my amiga 2600 wheel but it doesn't show, what am i doing wrong. On my nes i have put the boxart in Artwork2 and it shows when i highlight a game in the wheel but on my Amiga 2600 nothing comes up, what am i doing wrong.
Last reply by fenster89411, -
- 0 replies
- 140 views
Hi, I've a question about my new configuration of a MamePc in cabinet with Hyperspin and Rocket Launcher. My configuration is: XP SP3 with 2 HDDs - C:\ Primary, with S.O. and about 250Gb free space. - D:\ Secondary, empty with 3.6 Tb Free . I would use EWF and HORM configuration to start XP and launch FE. My question is: Should I install the HS and RL on drive C:\ and put All the ROMs in drive D:\ ? Or Install All in D:\ (Hyperspin, rocket launchers and ROMs)? Doubt comes for proper use of EWF + HORM configuration, to turn on this property only in C:\ or on both disks . Thank you in advance Bye.
Last reply by alibao, -
- 2 replies
- 197 views
Hi guys, When I set the ROM path in Hyper HQ the program crashes.I know my files are Ok as they work fine on another computer running Windows 8. Even with the firewall & anti-viruses off Hyper HQ still crashes,also tried running Hyper HQ as administrator and tried all the compatibility modes that Windows allowed even tried it with anti-viruses on with exceptions but nothing seems to work. Does anyone have a solution or guidance for this problem ? Thanks in advance
Last reply by bhoyo, -
- 0 replies
- 155 views
I'm having trouble controlling some sega systems in retroarch with and X-arcade controller. I have them all set to Core is genesis plus GX bind mode Retropad All users set to Joypad Auto Sysytem I have set to this core are sega master system, sega genesis, sega CD, sega game gear and sega 32x All have trouble but sega genesis and sega game gear. I was wondering if anything one else had this problem?
Last reply by kylecp1979, -
- 0 replies
- 175 views
The video quality in hyperspin is pretty rough. The themes I'm working on right now expands a 1080p video across the screen. So my problem is that the video quality is high but whenever I use the video through hyperspin, it seems as if the framerate is significantly dropped. I don't know if there is a work around to force hyperspin to playback videos in 60fps or if i'm basically screwed. I'm not thinking the issue is coming from my pc since my specs are pretty decent which leads me to believe that hyperspin is just locked at a lower framerate. My specs: GTX 970 i7 4790k 16gb ram hyperspin is on my 5tb hdd
Last reply by Retro956, -
- 0 replies
- 140 views
Hey there.. don't know where to start but here it goes, anyway.. setting up my HS and RL as well, games runs just fine. I am only having one problem how do I remove a game names that is all the same? Example: Metal Slug, it shows the same Metal Slug all over the wheel.. how do I just make it one? Here's a pic of an example. Also how do I make a nice picture name for that game on that wheel instead of that boring old blueish text? Thanks in advance.
Last reply by GloryNGuts25, -
- 1 follower
- 13 replies
- 358 views
I need some help configuring my wired Xbox 360 controller to work in hyperspin. ive used help videos and forums to tackle most of my issues but I haven't been able to resolve this one in particular. My controller works fine when in rocketlauncher but doesn't do much of anything in hyperspin. Any help or direction will be much appreciated. I'm using hyperspin 1.4 on a Windows 7 64 bit computer. At this point I don't know if I have a configuration issue or a Windows issue. Advice?
Last reply by TheMadHatter, -
- 1 follower
- 6 replies
- 205 views
Have a major stumbling block in my implementation of c64 (WinVICE). Basically going for a mouse/keyboard free setup of HS with the help of Padstarr. WinVICE is 98% there except for one issue....Flip lists. I built a fliplist for every multi-disk game and can scroll them with the gamepad once loaded...but loading them is the issue. Is there a way to have RL launch each game from the command line so I can add the -fliplistname parameter. This would concurrently load the respective fliplist along with the game.
Last reply by gigapig, -
I am not sure whats wrong with this build. Hyperspin wont launch anything, but launches fine in RLUI. The hyperHQ controls are working fine but when I try to launch the game, nothing. Its like the rocketlauncher isnt receiving the commands from hyperspin to launch.\ Any ideas? The default frontend is set as hyperspin The default hyperspin path is correct The default plugin setting is correct Any other ideas? Any help is greatly appreciated, pulling out my hair atm.
Last reply by Avar, -
- 5 replies
- 177 views
I have Hyperspin 1.4 functioning how I want it to except for one problem. I use an Xbox 360 wireless controller with the official wireless adapter, currently using Windows 10, but have the same problem on Windows 8.1 (tested). When I try to scroll through the various wheels my controller is sometimes partially responsive, sometimes not responsive at all, and sometimes gets "stuck" after a movement up/down and the wheel menus just keep spinning until I shut down Hyperspin manually. As a workaround I've been using the keyboard, but I want to use my controller since this is a living room setup. The thing is, the controller works perfectly once I get into any game, so…
Last reply by diskmach,
-
Popular Contributors
