Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,051 topics in this forum
-
- 0 replies
- 17 views
I should state that I am new to this whole Hyperspin software so it could be an ignorant configuration on my end. I use Retroarch as the emulator for several consoles, and have all software and cores updated. (SNES/GEN/N64) Problem: If I launch say console x, I can play a game, exit said game, and launch another within this console. If I play a game using console x, then decide I want to play console y (both using retroarch but different cores) I must first manually kill the Retroarch process in the task manager. Otherwise it will not launch the rom. Also if I try to launch a rom in a console not using retroarch it will launch the rom with no issues. TLDR:…
Last reply by pizike82, -
.thumb.png.a948847016645c266a2c99c360f4d15c.png)
- 1 reply
- 43 views
Hi, i've a problem with winUAE so,i've download the games from killer gorilla set when a start any game the emulator give me this error ] in rocket laucher give me this i don't know what i'm doing wrong
Last reply by Accorsi, -
- 1 reply
- 28 views
As the title states I have working roms, media, artwork, and everything is going smoothly. Well except for the jaggy edges from the graphics... I can't seem to find the option or if I'm even looking in the correct place. I know that it is possible because I have a Retropie image on a raspberry3 that runs Super Mario N64 beautifully. I remember going into the menus of retroarch (though this PC version is a bit different) and selecting screen sizes and the option to use AA. I've found where to adjust the screen resolutions in retroarch and I assumed it would be in the area but for the life of me I can't seem to find it.
Last reply by pizike82, -
- 2 followers
- 3 replies
- 74 views
Was wondering if the original xbox can be emulated (for the wise asses) and run on HyperSpin?
Last reply by KlopjerO, -
- 1 follower
- 1 reply
- 43 views
Hi all! i'm trying to run NEC PC-FX System , but not able. I tried Retroarch with mednafen libretro, Mednafen Emulator without success. I copied and pasted the executable command from RL log to the windows console and can't see any log. Mednafen doesn't open any window after that command. Any solution? (i pointed to pcfx bios always)
Last reply by badboo, -
- 2 followers
- 11 replies
- 101 views
Can someone run Nintendo 64DD games with RetroArch? I'm not able and i don't get any error loading games. Any help would be appreciated.
Last reply by badboo, -
- 0 replies
- 15 views
Hi guys, some mame games lose focus after launch. I can still see the game, but hear the video sounds of hyperspin video running in the background. The controls also dont work because the windows is not active. Only happens with some mame games. i only use retroarch as emulator and dont wanna use any other. just clean one emulator system. thx.
Last reply by mureygon, -
- 1 follower
- 0 replies
- 18 views
Hi! After my Windows 10 hanged i realized my second xbox 360 wireless controller keys doesn't appear in retroarch (controller is detected, but the auto-assigned keys not). I did a clean RetroArch installation with the same results. Controller is detected by windows and for example xpadder. If i use auto detect on RetroArch, it works perfect. I don't know how can i solve this. Is a very strange situation. Hope someone knows how to solve it. Thanks in advance!
Last reply by ci2own, -
- 1 follower
- 5 replies
- 62 views
Hi, what emulator do you recommend for the Nuon? Thanks
Last reply by ninja2bceen, -
- 6 replies
- 61 views
Hows it going guys? Got a problem thats been bugging me for a few days now and i have no idea what to do to fix this. Im trying to get bezels to work with mame, running through HyperSpin..Now i can use rocket launcher to launch a game and the bezels show up just fine..kind of except for the background art work gets covered up due to the screen tv, edge overlay thingy?..but it does show fine. Now when i run the games with hyperspin, i get no bezels showing at all now somewhere they are not talking to each other but i cant for the life of me find out where. I have it setup up in hyperHQ to use rocketlauncher bezels..but ive no idea whats going on.…
Last reply by lee81, -
- 0 replies
- 21 views
My cabinet has an X-Arcade Tankstick and I have successfully setup WinVICE under HyperSpin & RocketLauncher. I can load the games, no problem. I have even configured the joystick and saved settings but I cannot figure out how to set up the Run/Stop Key. I know it is the "ESC" key by default but I would like to map it to either my Caps Lock key or another joystick button on the Tankstick. Is there a setting somewhere I can set this up? I didn't see anything in my vice.ini file. I'm not sure where to begin. Please help. Games like Friday the 13th, Jumpman Junior, Space Taxi and Boulder Dash await!
Last reply by JoeyRewind, -
Hi friends Lately I have been busy setting up Atari800 , each time I load the game the emulator start with TEST SCREEN. How can I directly launch the game instead of getting into TEST SCREEN? Here is my config file Atari 800 Emulator, Version 3.1.0 ROM_OS_A_NTSC= ROM_OS_A_PAL=C:\Users\Hyperspim\Downloads\atari800-3.1.0-winsdl\Bios\atariosa.rom ROM_OS_B_NTSC= ROM_OS_AA00R10= ROM_OS_AA00R11= ROM_OS_BB00R1= ROM_OS_BB01R2=C:\Users\Hyperspim\Downloads\atari800-3.1.0-winsdl\Bios\atarixl.rom ROM_OS_BB02R3= ROM_OS_BB02R3V4= ROM_OS_CC01R4= ROM_OS_BB01R3= ROM_OS_BB01R4= ROM_OS_BB01R59= ROM_OS_BB01R59A= ROM_5200=C:\Users\Hyperspim\Downloads\atari800-3…
Last reply by shitoken, -
- 1 follower
- 4 replies
- 73 views
When I launch an electronic handheld game, the hyperspin game wheel is still visible in the background. Is there a way to add just a black background? Using a solid color background/ or some type of bezel? *Also is there a way to make the current handheld being played bigger on the screen/resolution..? btw, using pclauncher (the files/games are .exe) any help appreciated, thomas
Last reply by ci2own, -
- 0 replies
- 19 views
Hello Everyone Well i have this problem when loading a game in final burn alpha emulator using RocketLauncher, the problem is after i launch the game and exit using ESC rocketlauncher still processing which will prevent me from loading another game, this only happens with Final Burn Alpha other emulators exit fine with no problem is there any solution for it ? Thanks
Last reply by AYOOOB, -
- 3 replies
- 23 views
In MAME when I try using any trackball games, it works for about 3 seconds and then I'm getting a "select position to load from" that pops up. Does anyone have a solution for this? It does it with the trackball and with the mouse.
Last reply by Avar, -
Hi! i've been experiencing some problems with RetroArch. For example in Sega Saturn, when load a game it starts with Saturn Pad instead of RetroPad or RetroPad w/ Analog as it should (And i can't swap to RetroPad during the game, because it only appear Sega Saturn Controllers to choose). Is there a way to tell RetroArch to start always with RetroPad for example?
Last reply by ci2own, -
-
- 1 reply
- 39 views
Hi Everyone! I am having trouble with Naomi roms running in Demul 7.0 - I have everything set up in HS & RL to launch Decrypted roms successfully but my problem is this: Each game i run prompts the Caution 51 error which is due to number of players set in test mode, but when i alter the settings for each game the emulator only produces a "dummy" eeprom and sram file which is subsequently overwritten by the next game's settings. Should these files be in folders that match the decrypted rom names or perhaps the original encrypted rom names? It is driving me crazy having to change the settings each time i load a rom, could someone help?? Thanks i…
Last reply by Avar, -
- 1 follower
- 2 replies
- 43 views
I've been looking the best way to configure and use DEmul for systems that can be emulated with this emu and don't really know how to do it yet. I've read i should create a different emulators on separated folder and one different module for each system i want to emulate with DEmul. I guess this is because controllers won't be override when emulate those differente systems. Is that right? Can someone tell me what would be the right way to do it or a good tutorial? I want to use my XBOX 360 wireless controllers if possible. Thanks in advance!
Last reply by ci2own, -
- 1 reply
- 25 views
heyhey everybody .. just want to say thanks for you time .. you didnt have to be here but you are so thanks! lol ok so heres my problem .. in rocketlauncher im using the snes9x emulator..on two systems snes and satellaview same emulator same module but the major difference is i cant exit satellaview games from the esc key.. when i load the games directly from emulator itself it does the same thing just brings up the menu or makes it go away i have no idea whats the difference ive been looking inside the module ahk file for clues but i dont see anything different .. any help would be majorly appreciated!!!
Last reply by Avar, -
- 1 follower
- 1 reply
- 24 views
Hello, I've recently begun receiving this error in Arcade64 (MAME) .180 Only happens with a few games and seems to be in the MAME INI folder\<game>.ini and the entry: monitorprovider auto Any idea on how to fix this error? And wondering why it's happening... ? Would cleaning out my MAME's INI's work or do any harm? thanks, Thomas
Last reply by gigapig, -
- 2 replies
- 33 views
Most the games uses different key mappings , I wanted to ask how do you map your controls more than one game. I cant find any solution to this. Example racing racing games most of them use different configs. Please share your methods.
Last reply by shitoken, -
- 5 replies
- 35 views
Hi, I have a doubt. I've installed Hyperspin, but after to play a Mame game and when I try to exit of the emulator its take up to 30 minutes to go back to the main menu. The others emulators exits normally. It's in the last version of Hyperspin. Machine configuration: Core 2 Duo Processorl, 2GB Memory, GT620 nVidia and 500GB HD. Thanks in advance.
Last reply by MichaelCastro, -
- 1 reply
- 50 views
Does anyone have any info on setting the Xbox One controller up for MAME? Like: -Rotary (Analog joystick?) or just use the joystick hack of the rom? -trackball Also is it better to convert my xinput to keyboard key inputs? First time i am gonna setup my controls so any tips or even a pregonfigured file would be great.
Last reply by ninja2bceen, -
- 1 follower
- 4 replies
- 116 views
hi all just wonded if theirs any information that some one could share on what i need and where to start. iv read some stuff that i need attract mode, pc launcher ect, i have the nesica front end with a standalone rocket launcher in there but im strugleing to get the info of what to do. could someone point me in the right direction please of what i need and to get games running and any emulators f needed thanks for any help.
Last reply by shitoken, -
- 1 reply
- 35 views
Ok, so I really want to add the 3 pinball titles to Hyperspin (Future Pinball, Visual Pinball, and Pinball FX2). Can anyone PM me links to all the files required to do so? It'd be really appreciated. I know one of them (Visual Pinball, I think) had like 5 different versions of the emulator, how exactly would something like that work when setting it up in HS?
Last reply by BATTLEDONKEY,
-
Popular Contributors
