Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,054 topics in this forum
-
- 5 replies
- 625 views
Ok... I have looked for 3 days on... I even got off of this emu. and tried Magic Engine... It seems that either one of these is going to give me issues... So I am back to my original Turbo emu... I can run the emulator OUTSIDE of hyperspin.. But when running inside, I come up with an error "Can not find syscard3"... I am so confused... When I look for tutorials... I am coming acroos syscard3 downloads... Then a folder that doesn't exist in my emulator (Medna* something??) So heres my log... ANY HELP WOULD BE APPRECIATED!! 12:24:04:236 | HL | INFO | +N/A | Main - HyperLaunch v3.0.1.1c 12:24:12:772 | HL | INFO | +8531 | Main - System Specs: HyperLaunch…
Last reply by hypermame55, -
Hey Guys I have an issue with xpadder. If I load up a game like Pinball Fx 2, or ultra streetfighter 4. Once I get in game, if I press left, right, up or down on my arcade stick. The cursor will jump two spots instead of one. But as soon as I close down xpadder, it goes back to moving one space. How do I fix this without shutting down xpadder? Im assuming the inputs are registering twice, once for the controller, once for xpadder. I just dont know how to fix it. Thanks Christopher Shaw
Last reply by marxkemp, -
- 4 replies
- 579 views
Hallo hyperspinners I have updated my hyperspin modules, and now I cant get scummVM too work with 7z. files. I have read the module notes, and wanted too use this Launch Method: ; Launch Method 1 - Rom_Path has archived games inside a zip, 7z, rar, etc ; Set Skipchecks to Rom Extension and enable 7z I have Set Skipchecks to Rom Extension and enable 7z But then I get this error : I have no problem getting the each game inside its own folder and uncompressed method work, bt I wanted them zipped. :-) What is the problem here?
Last reply by ArtMac, -
I am adding cave next don't no much about do u point to your mame rom folder and is it mame u install to run thee games or something else my mame is MAMEUIFX .154 x64 NoNag+HiScore+NeoGeoXtra was reading something about certain mame emu wont play cave games.
Last reply by ThiagoAlmeida, -
- 21 replies
- 1.9k views
Looking for advice (as usual) I had my HS set up and working great on my main PC but the time finally came to shift it all over to the PC I will be using in my cab... It all went relatively well I guess... On my main PC it was all installed on the G drive...so copied it to a drive lettered up as G Drive in my cab machine...anyway in the main it all works... I was however running .150 Mame and decided to upgrade to .152 using Jumpstile's build of MameUIFX from the FTP.... Now it won't save hiscore data... Am I missing something. I copied all the /hi folder the hiscore.dat etc but a) the existing scores don't show and new ones aren't saved. The option for hiscores …
-
- 2 replies
- 502 views
Hi sorry for my bad english (i'm french). I hope I can ask my question here. When I start a game american laser game i do not see the cursor on the screen and after American laser game introduction my games go directly at the end of game and make a while. (introduction -> end of game -> introduction -> end of game). Can you help me please This is my log file --DAPHNE version 1.0.10 --Command line is: C:\Users\Sylvain\Desktop\singe test\daphne_singe\daphne.exe singe vldp -x 800 -y 600 -fullscreen -noserversend -framefile singe/crimepatrol/frame-crimepatrol-cdrom.txt -script singe/crimepatrol/cdrom-crimepatrol.singe --CPU : GenuineIntel 3400 MHz || Mem : 40…
Last reply by orphen92, -
- 5 replies
- 2.1k views
Hello All, I struggled with getting Daphne and Hyperlaunch 2.25C working the way I wanted for a while. Finally got it all ironed out and working nicely and wanted to share a few notes that may help others in my boat. Also, huge thanks to jonnieboyrevel as his "sort of" guide got me on the right path. (A 'Sort Of' Guide to Daphne) Configuration: I am using an ArcadeVGA to 15k Arcade monitor and HotRodSE controls (transplanted to an arcade cabinet) Windows 7 64bit Main Issue Encountered: I could not get Daphne to recognize the controls I configured in DaphneLoader. I tried the method pointed out by jonnieboyrevel in changing the top line of the Daphne Settings.ini th…
Last reply by rfancella, -
- 5 replies
- 976 views
I'm not sure if I just missed the option or its not something I can do but I'm trying to switch video modes (3:4 to 16:9) on the fly in MAME with a hotkey. I'm not trying to rotate the display but rather toggle through the different video modes on the fly (MAME on screen UI > Video Options > "Standard 3:4") for example. Is there any way to do this in MAME or something AHK or HyperLaunch can do? Thanks!
Last reply by ericlecarde, -
- 14 replies
- 5k views
Hello, I don't know what I am doing wrong but I can't enable the GSdx shaders included in "GSdx_FX_Settings.ini", I enable CRT scanlines and other shaders, but when I press "Page Up" key (turn on), I only get a faint antialias effect. If I press F7 I get all sort of scanlines one after another, what is what and how can I make it work? I did the main thing; Fxaa=1 in GSdx.ini and set #define to 1 to the entries in GSdx_FX_Settings.ini. I tried with the Dx9 renderer and Dx11.
Last reply by Dogway, -
- 1 reply
- 970 views
hi guys, i tried winape and cpce for amstrad cpc emulation, both are working, but the cursor keeps automatically going left. I unplugged keyboard and ipac and still it keeps moving left. really annoying. i startet cpc emulation in mess, and there are no problems with the controls... so i edited the mess.ahk and pasted "amstrad cpc" under "msystem =" but still no luck. hyperlaunch gives me an error: Your System Name is: Amstrad CPC. It is not one of the known supported Systems for this MESS Module: MESS. the strange thing is: the Amstrad GX4000 works. here is my ahk: MEmu = MESS MEmuV = v0.151 MURL = http://www.mess.org/ MAuthor = djvj & faahrev MVersion = …
Last reply by gokanayz, -
- 6 replies
- 609 views
Hello, I trying to get Retroarch to work with TG16 but only getting black screen in retroarch. Only 1 game works, Alien Crush game, the others get a black screen. GBA games works fine in retroarch. PCE fast core: Medanafen 0.9.28 Anyone experienced the same issue? Thank you
Last reply by DryFour, -
- 6 replies
- 2.8k views
So this is a long shot, but has anyone managed to configure a script that is capable of launching Zelda Four Swords Adventure (for the GC) configured to launch VBA as well to play multiplayer. It's a favorite of mine that seems like a brilliant fit on the arcade I just recently started toying with. (I'm be posting up some details on that in a bit) I've been working with getting my Hyperspin setup for a couple weeks now, picking at it when I have some time. This is one thing that would make me really happy to get working though. Thanks, Glenn
Last reply by Haaze, -
- 4 replies
- 576 views
Hey Everyone, This is my first time posting in here, I downloaded and started working on hyperspin last week with a lot of success, I'm confused how people take months to set this up. It's not too complicated. With hyperlaunch and some other tools it seems quite intuitive, I currently have my setup with a couple of xbox360 controllers, until I'm able to purchase parts for building an arcade controller. I've found a few programs to map the guide button but every-time I use any of them I run into the same problem. If I map ESC to any of the buttons with xpadder I have no issues, everything closes fine and hyperspin regains focus. However, when I use any of the three progra…
Last reply by damageinc86, -
- 1 reply
- 357 views
not all games work this way around 80% i found so far! you need an awesome tool called [Dirmaster] this edits and creates c64 images on your windows system including chds. get Dirmaster here: http://style64.org/dirmaster you need to create a blank D81 image select all files on d64 images and click hold and dump them in your blank D81 image remove bar in top column this will make disk run auto in *,8,1 make sure the exe of the game you want to load is up top column or else game wont work just get an error! save and your done. also in vice goto drive settings and click on d81 drive and your good to go!
Last reply by Dime333, -
- 103 replies
- 10.3k views
Hey Everyone, I am having a frustrating problem with setting up two AimTrak Lightguns to work in mame. Before you suggest... I have read all the documentation on Ultimarc site for the AimTrak and have looked at all the forum topics here and at byoac, but nothing to help me with my issues. I am using the advanced aimtrak utility provided by Ultimarc to calibrate and assign separate device ids to each gun. Both guns are responsive and work in windows, however when in mame and setting up the general config inputs for player 1 and player 2 I get the same input gun 1 x or mouse 1 x for both guns. I have tried every setting possible in the mame.ini with no resolve. For example…
Last reply by wizshaw, -
- 14 replies
- 2.2k views
Very nice ! maybe you should work with craiganderson on this system, he's building a very nice hyperspin X68000 section ! Your skills could be handy for both of you http://www.hyperspin-fe.com/forum/showthread.php?30199-Unofficial-Sharp-68000-wheels Maybe you already know, just to be sure
Last reply by craiganderson, -
- 25 replies
- 2.3k views
Ill be quick.. AND ANY HELP IS APPRECIATED! I have MAME and NES working fine on Hyperspin... But my issue is Atari 2600.. Both the emulator (Stella) and roms (bin).. Run fine when I launch them inside HyperQ.. When I run them through Hyperspin.. It says "Can not find any roms.. In any rom path.. With ext zip|a26|bin".. But all files in folder are bin.. And I am in the right path.. What am I missing?? THANKS! (A setting in Hyperspin to open bin files?)
Last reply by Heatmizer, -
- 3 replies
- 507 views
Howdy, Would like some pointers on setting up WinVICE. I'm trying to launch Last Ninja 2 which is a d64 extension. I end up at the basic screen with the following: Load"*",8,1: Searching for * LOADING Any ideas?
Last reply by gigapig, -
- 8 replies
- 923 views
I have a problem since i have to reinstall windows due to a virus problem, i install all drivers, vcredist, directx, all i can think of but cant make sega model 2 emulator work again. I also download the emulator form the hyperspin ftp again (there i get it originally). all i get is that the emulator as stoped working with no details. I use windows 7 x64 The error show up when i launch any rom.
Last reply by knewlife, -
- 2 replies
- 456 views
So Norton removed hyperspin as a virus, I realized too late before it removed it. I restored it but not when I am in hyperspin it is not loading the games. Any help would be appreciated, I would really hope I don't have to start over. So I figured out that Hyperlaunch is the problem. It no longer works. Any ideas?
Last reply by jcrowley30, -
- 5 replies
- 1.1k views
Hi! Right now I am using a compiled version of MAME 0.145 with No-Nag to remove the press OK to being and gameinfo screens. I know that there is a Command.dat file which basically shows list of moves in a fighting game when you press a certain key when running the game.(I use it on my PSP Neo-Geo and CPS emulators and it works there.) The webpage of the command.dat says MAME32 and MAME32++ support it. Now the question is does my compiled MAME version support it? How do i go about enabling it? If not can I add it during compile like No-Nag? Thanks!
Last reply by jeanvion, -
- 2 replies
- 438 views
Hello, Just wondering if anyone is have trouble with running the game Sol Feace for the Sega CD in Fusion. When I launch it it hangs right after Sonic shoots the stars from his fingers... :/ thomas
Last reply by thomas3120, -
- 1 reply
- 1.5k views
Anybody able to get both Badlands running on one wheel for Mame & Daphne? *because they have the same name the mame wheel can only show one theme for both games* This would be "multiple emulator's on one wheel" the Atari car game & Badlands laser disk game. I've tried renaming the Daphne framefile etc. but it doesnt work. I've even tried to use the Atari badlands clone but the rom doesnt work within mame yet. Ive read some posts of people trying to achieve this but did not see any success. M
Last reply by Torden, -
- 19 replies
- 2.5k views
I have most emulators working except for the SuperModel3 one. My current onboard graphics card (Intel 946gz) appears to have OpenGL support added in 2008, and it shows as version 2.0 in a GL test, but I just couldn't get it working. I even tried adding the nospotlight shader as recommended in their help section, but it still didn't like it. I'm wanting to get a better graphics card. I have AGP on the board (Fujitsu Siemens D2660). Am I right in saying the max memory for an AGP card is 512mb? I was looking at this card, would this be a huge step up from my current card? http://www.ebay.co.uk/itm/EVGA-GF-6200-512MB-AGP-GRAPHICS-CARD-/181169617397?pt=UK_Computing_Compu…
Last reply by potts43, -
- 7 replies
- 1.2k views
I have a full set. A quick audit in HLaunch shows me these 49 as missing? Missing List: ----------------------------- calspeeda carnevil1 chaoshea chaosheaj cndypuzl cps3booto cps3bs32 cps3bs32a ddrbocd flipmaze futariblk galpanica gauntdl24 haremchl jdreddb jojobar1 jojor1 jojor2 kizuna4p kollon kollonc lasstixx mahjngoh mgnumber mgprem11 natodefa nightrai otenamhf otenamih otenki psyvaria psyvarrv raycris redearthr1 sfiii3r1 shanghss shangtou shikigam soutenry spuzbobl spuzboblj usagi vaportrxp wargodsa wargodsb wotwc xiistag zokuoten zoo Have these been moved? renamed? Does the xml need updating? I thought it was .154…
Last reply by brolly,
-
Popular Contributors
