Emulators
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
2,054 topics in this forum
-
- 5 replies
- 710 views
Hello out there. I was just reaching out to see if anyone had any hints or tips for my Naomi setup. I have it up and running but it seems that if Demul stops working, all configuration files are then corrupted and have to be reset. I can do the whole copy the config file and replace it but that can be a nuisance. I have been trying to get Dynamic Golf running but it fails soon after the initial boot up screen. When I then leave the game and try something new, all settings (controller) have been removed. Any advice or tips? I have read all the module notes and stuff from djvj but I wasn't sure if someone had their own workaround or tip. Thanks!
Last reply by gigapig, -
- 2 replies
- 530 views
I've just been messing with a few different emulators, and saw on a list that Makaron is better to us with Windows CE games on Dreamcast than Demul. My issue I'm having may just be a simple setup issue, I found all the files I need to run it I believe. I'm running GDI files, which as far as I know work with Makaron. My problem is when I go to use an image, I get an error: I haven't been able to find any solution online, so I want to see if anyone else knows what the issue might be.
Last reply by hhgross, -
- 2 replies
- 478 views
hi guys so i set up my emulators etc in hyperlaunch hyperlaunch runs them great but when i run them in hyperspin it gives me a simple error an unknown one even so my settings . inis look normal i have no idea whats up the only thing i can think of is cause ive named my folder diffrent rather then hyperspin it seems to be looking for the orginal hyperspin folder which mine is set as this Hyperspin 2014 Belive The Hype rather then this HyperSpin and its doing it will all my machines ive setup through hyperlaunch. my set up .ini dice emu it turns out it was pointing to the wrong hyperlaunch simple fix if you guys get stuck this is how to fix it im a noob for not spoting…
Last reply by relic, -
- 2 replies
- 553 views
I have Daphne working fine outside of hyperspin, but when I launch it from within Hyperspin with Hyperlauncher 3 it insists on changing my screen resolution and it doesn't go back after quitting the game, so then my hyperspin menus are all hanging half off my screen. My hyperspin setup is default a 1920x1080, I would like to just run Daphne at this same resolution or be able to make sure it returns to back to 1920x1080 when it quits back to Hyperspin.
Last reply by Griffindodd, -
- 1 reply
- 510 views
Hello Sorry to be checky but i have been told to ask on the hyperspin fourms due to my front end been unsupported. I hope you dont mind. I use maximus arcade and im trying to get atomiswave (demul) working in it. I understand you have to use ahk to make this happen and i have never used this software before and dont really understand it. What im asking is could someone help me get this up and running please. Thank you in advance.
Last reply by gigapig, -
- 6 replies
- 480 views
Not entirely sure if this is where i should be posting this but i have successfully got the vectrex to start up and run games. However the issue i am having is i have mapped buttons 1-4 however it appears only button 3 is actually functioning. I attempted mapping to the keyboard and to a 360 controller with the same results for both. Any help would be greatly appreciated.
Last reply by rfancella, -
- 1 reply
- 423 views
Not sure if this is the right section but... So I had mame running perfect with integrated graphics. I now have a 780Ti and the games are over stretched. How can I either change the resolution in mame to 1280x1080 (as there is no resolution option in the .cfg file) or how to I set the slider values for all games rather than individually? Thanks.
Last reply by showstopper, -
- 5 replies
- 3.3k views
Hello, where can I find the latest GSdx plugins for PCSX2? I think v0.1.16 being beta has a few issues with some games, but I'm interested on it as well because the game I want to run (Sly Cooper) runs VERY slow with 0.1.14 even in native mode. I found a fishy link of v0.1.15 on 4shared link from google, but it doesn't include the AVX build which is a great performance improvement on 3rd and 4th gen Intel CPU's, I have even seen an AVX2 build might be around as per forum posts.
Last reply by Dogway, -
- 6 replies
- 2.1k views
Hey I downloaded some artwork files from mr do's arcade and I'm having some issues. I dropped the files (zipped) into the artwork folder but when I boot the game the bezel shows up but with no game image. All I get is a white box where the game should show up. mame version is 1.45, I got it from a friend and it's set up to save high scores/disable all nag screens. I used an updated version of mame (1.47) and it worked fine but the nag screens pop up every time even if I've booted the game before. This is for a custom arcade cabinet so I can't even pass the nag screen without a keyboard plugged in. That's why I'm trying to get it working with the older version. I'm using…
Last reply by gigapig, -
- 2 replies
- 482 views
I can play NES games with my control panel on xbox 360 controllers. When I launch nestopia with my xbox 360 controllers disconnected it says it could not find the controllers do I want to change my config and I always say no. Is there a way in nestopia to have it not prompt about this?
Last reply by dougan78, -
- 2 replies
- 655 views
Hi everyone! I have some issues with xpadder in hyperspin and I really need your help Here is my system and my software for Hyperspin 64-bit Windows 7 Hyperspin v 1.3.2 RocketLauncher.0 Xpadder v.5.7 pad : Logitech F710 I have read a lot of tutorials here and there and I was able to configure everything and almost all emulators works fine without problem ; But when I want to control everything with Xpadder I have a little problem I can not solve : Once all profiles configured on Xpadder hyperlaunchHQ ( Hyperspin , hyperlaunch , emulators ), I run hyperspin the xpadder profile load and works fine but when I decide to load an emulator there is no possibility to sw…
Last reply by omarus, -
- 4 replies
- 475 views
I have an interesting situation with my aimtraks, I have 2. If I download mame 153b from the official site the guns work fine, show up as gun1 and gun2 buttons work life is good(except the nag screen, warnings, info, no high score support, etc). I put ANY of the jumpstile builds in none of them work with the guns and see them both as mouse 1. Swap back to my original mame 153b and presto guns work fine after reconfigureing the inputs. Is there something special that needs to be done with mameuifx and jumpstile's custom build to make mame recognize them as guns instead of mice? and recoginize both of them as separate devices?
Last reply by dougan78, -
- 7 replies
- 4.7k views
Hi all, I know I've seen a million threads about this, but I can't seem to solve my problem with resolution changes, since I have the newer version of nullDC. It works fine outside of Hyperspin, but not within. Can someone help?
Last reply by lmsilva, -
- 20 replies
- 1.6k views
Hello all... I am having a lot of trouble with Sega CD and Daemon Tools. I have DT working with Sega Saturn thanks to Gigapigs walkthrough but am unable to get Sega CD up and running. I have all the paths mapped correctly as far as 7Zip, DT, Roms and Fusion. I get to the screen where it says "No disk". I am able to get my files working outside of HLHQ by mounting the file, starting Fusion, then selecting boot sega cd. That is the only way it will actually run. I downloaded a few games from PD just to toy with and they are in .CCD format. Most prefer bin/cue but these (I thought) would be simpler. The settings are DT=True, Use SCSI= True, I have the correct drive listed in…
Last reply by lovemaker72, -
- 11 replies
- 884 views
Hi Can anyone point me to a good guide for installing Fusion on Hyper spin, I can not get it going My main issue I having is this error: DaemonTools support is enabled but could not find. Please set your DAEMON_Tools_Path to where DTLite.exe is installed or turn off DT support for this system". I have installed Daemon lite and have made sure it is enabled in Global and Sega Master System If anyone has a good step step guide of Fusion/Daemon setup or can help with this error I would really appreciate it
Last reply by Frogger, -
- 6 replies
- 1.6k views
I am currently setting up VICE in Hyperspin, and I had owned an actual C64 back in the day. Most if not all the games required some sort of keypress, including but not limited to spacebars, F1, Run/Stop, and more. If you have C64 in your cabinet, how did you get around this issue? I kind of want to avoid having a keyboard in a drawer in my cabinet, but that seems like the only solution so far. Can anyone out there impart some knowledge? Thanks!
Last reply by RayzzorBlack, -
- 9 replies
- 3.6k views
All my 3DO roms are in a .zip format. I've tried mucking around with FreeDo, FourDo, and Phoenix and they all seem to want the .iso format. Is there a Hyperspin compatible 3DO emulator that will run the .zip roms or do I need to look for new roms? If one of those emulators are compatible, instructions on their use would be REALLY appreciated. Thanks for reading![/b]
Last reply by x_crackers, -
- 5 replies
- 1.7k views
I have just started messing with HLSL in mame and I am trying to get it running outside of HS and I am not having any luck. I am running mame 152 and anytime I enable HLSL, no matter the settings, when I launch mame the screen is black and I get nothing. I disable it and all works fine. I have tried several different hlsl settings and all give the same issue. I am running dual AMD Radeon HD 5670 cards, can the not handle it? I have tried adjusting my screen resolution as well but same issue. I have my hlsl folder and all the scanline pngs are in the mame artwork folder. Anyone experienced this? Am I just overlooking something simple? Any help is appreciated.
Last reply by joe35car, -
- 7 replies
- 733 views
Dear all, I finally managed to get Zinc to work (man...what a battle that was!) but I'm now having graphics issues with SOME games (e.g. aqua rush). Check this video out: Do you see what happens at 15s? That's pretty much how I see the whole game. I also have similar problems with other games like Cool Boarders, where some layers / tiles in the game seem to be missing. Any thoughts on how to fix this? Is it just an emulation issue? (the best that the emulator can play the rom) OR, is it a configuration problem? Thanks, Luis
Last reply by lmsilva, -
- 1 reply
- 562 views
hi I can get my c&c games to load from HLHQ but not from the hyper spin wheel I downloaded them from the origin site.. I've created my xml file it's showing the games in the wheel but not launching them. any ideas would be a big help. I've looked at a few tut's on here but got stuck all games play fine outside of hyper spin.
Last reply by rfancella, -
- 46 replies
- 10.7k views
Hi, I've been playing around with the shader option in Demul, in order to add scanlines... At first I used some shaders found on the net, but ended up writing my own ones (using the scanline-tv formulaes from mame plus) Here are some screenshots (as you will see, there are different options, on based on the resolution you play in, you'll prefer using 2, 3 or 4 line modes) 1280x960, scanlines using 4 lines 1280x960, scanlines on 3 lines 1280x960, scanlines on 3 lines 1280x960, scanlines using 2 lines 640x480, scanlines using 4 lines 640x480, scanlines using 2 lines Now, to do that, you'll need two files (I saved them in a shaders subdirectory inside m…
Last reply by Rick74, -
- 8 replies
- 862 views
my hs is fully updated prosystem works fine outside hs but as soon as I launch it in hs full screen goes from nice colours to like old cga looking graphics...no idea why? thanx to any help
Last reply by DieCubsDie, -
- 4 replies
- 7.9k views
This is my first post and I hope it does not draw any heat. I have searched this site and various search engines for an answer and have come up dry. Well, here goes... I have Hyperspin as a front end obviously, and am trying to run any SNES game with it that I can when I encounter the same problem for every game. The message that pops up is this: "SNES 9x - Display Failure", followed by "Failed to initialize currently selected display output! Try switching to a different output method in the display settings". A second message then pops up after "OK" is selected. It reads "SNES 9x - Unable to intialize XAudio2". I'm sure there is a simple solution for this that is…
Last reply by patches0214, -
- 4 replies
- 647 views
Hello all, I have a issue with CD32 setup. I can run the game in HyperLaunch and HyperLaunch HQ. But when i will start the game from the wheel (Hyperspin) i get a message: Invalid system name or winuae.exe isnt surported. Can anyone tell me where i have to look. I had some other difficults with emulators but this one is realy hard Thx.
Last reply by Abelientje, -
- 5 replies
- 663 views
When I launch Mame .150 from HS, the game loads as normal for about a second, but then HS comes to the front and forces Mame behind. Mame is still running in the background unable to be seen. None of my other emulators do this. Any suggestions?
Last reply by JoeBlow42069,
-
Popular Contributors
