Support
Having problems with HyperSpin? You've come to the right place!
4,032 topics in this forum
-
- 10 replies
- 388 views
So I ran into an issue with playing Battle Royale under Pac-man Museum. I have the Ultrastick U360 joysticks and have the buttons running into the u360 to give that gamepad input. I also have an IPAC as this is how I originally ran it all before making the switch with the U360 Wire Harnesses. My question is, how can I make these buttons be a start button for this game? The game usually uses xbox 360 controllers it looks like. But I figured I can somehow get them to work with the cab. The first player will automatically as I select the game but not the rest. How can I get a input start button? Xpadder doesn't have a start button option to configure with. Any Ideas? I would…
Last reply by damageinc86, -
- 1 reply
- 166 views
Hi, The only way I can exit the emulator is pressing alt+f4. Esc doesn't work, ideally I would like to map alt+f4 to a button on joy1. Here is my settings.ini: [HyperLaunch] Last_System=Super Nintendo Entertainment System Last_Rom=Addams Family Values (USA) Exit_Script_Key=~q & ~s Exit_Emulator_Key=Esc Toggle_Cursor_Key=t MultiGame_Key=NumpadSub MultiGame_Select_Key=Enter MultiGame_Exit_Key=Esc Path_To_Daemontools= Path_To_CPWizard= Fade_In_Interrupt_Keys=anykey Keymapper_Path= Keymapper_Profiles_Path=C:\Users\Mike\Desktop\snes\HyperSpin\Keymapper Profiles\ Everything else works great. I just can't exit with my controller. Anyway to do this? Thanks. …
Last reply by helltick1, -
- 1 reply
- 190 views
I cant get dreamcast NullDC emulator to work for some reason I keep getting the error msg in the attached picture...any help would be greatly appreciated thanks!
Last reply by rfancella, -
- 4 replies
- 247 views
Call nonexistent function- module() error. Ive been searching the forums for an answer to this and everything says to make sure your hyperlaunch is fully updated. I did the GIT pull yesterday and again right before I posted this and still have the error. Running Emu7800 to play atari 7800 games. Works fine outside the emulator. Works fine when I do a system audit and launch from within Hyperlaunch HQ. I have 5 other systems with emulators that work fine so seems like I set up everything correctly. Also checked the module to make sure it is the newest at 2.0.1 and installed the older version of Emu7800 which is 1.3 to match the module information after trying 1.7. Alway…
Last reply by Nexus23, -
- 6 replies
- 561 views
Hello...First post. Hopefully I won't do anything too offensive. I'm trying to launch MAME, followed the instructions (as far as I know), audit roms, click rocket and I receive this error: This is the log from within Hyperlaunch HQ: 23:11:52:845 | HL | INFO | +N/A | Main - HyperLaunch v3.1.0.5 BETA (www.hyperlaunch.net) 23:11:52:847 | HL | WARNING | +0 | Main - You have "Logging_Log_Command_Window" enabled. This is only for logging errors being dumped to the command window from an executable. This may cause issues with running some executables and needs to be turned off when you are done. 23:11:52:921 | HL | INFO | +78 | Main - System Specs: …
Last reply by gigapig, -
- 7 replies
- 667 views
I can get Mame Roms to load in HLHQ and HL, but when I start game in HS it says that It cannot find the roms, any thoughts?? Hyper Launch Log from hyperspin dir: 08:48:11 AM | HyperLaunch v2.25c 08:48:11 AM | System Specs: HyperSpin Dir: X:\Hyperspin OS: WIN_VISTA OS Language: 0409 OS Admin Status: No Monitor #1 (\\.\DISPLAY1): 1680x1050 (1680x1020 work) HyperSpin Res: 174x106 AHK Version: 1.1.07.03 08:48:11 AM | HyperLaunch received "MAME" and "10yard" 08:48:11 AM | INI Keys read 08:48:11 AM | Checking paths 08:48:11 AM | Finished injecting functions into module 08:48:11 AM | Module is built 08:48:11 AM | Running module: ;---------------------------…
Last reply by Joenaz, -
- 24 replies
- 778 views
Hi lads, Everytime I take one step forward, I slip back 2 Spent the last 2 hours researching these issues and I am no closer at all. Can someone please tell me the easiest way to setup exit, save \load states for Fusion, scratch that, for all emulators, if possible? I have the latest version of Hyperlaunch etc and I am using an Ipac encoder. I have seen various threads about editing the settings.ini \ autohotkey, if I can set this for all emulators that would be great, as I want to use the same key combo for all exit \ save \ load for each emulators. I really appreciate any help on this.
Last reply by connorsdad, -
Hey all i got dice all up and running. but when i audited in hyperlaunch i seem to be missing games that are in the emulator. Breakout Gotcha Pong PongDoubles Quadrapong Rebound SpaceRace TVBasketball I searched google (a little bit) and couldnt find these games. Now i know this is a roms question and probably cant be talked about but any help would be appreciated. Thanks Scott
Last reply by snstay, -
- 1 reply
- 179 views
Hi All, I only run MAME and Daphne in HS. On the emulator wheel, is there any way to only have MAME and Daphne show up once. The wheel shows several instances of MAME and Daphne and spins them around when I'm moving between them. Is there any way to have MAME and Daphne show up once and basically not have them show up multiple times in a wheel? I just want to have each of them show up once. Thanks, Jason
Last reply by rfancella, -
- 1 reply
- 139 views
As title says I have all the revisions for all mortal kombats in mame in my rom folder But only ones come up is mk mk2 mk3 mk4 umk3 These are there main revisions but I would like all the revisions I have in my folder to show up in hyperspin An body help please and I'm not to clued up with hyperspin yet so please help Have tryed these reviosons in hyper launch and they work so how can I get them in my hyperspin section pls help
Last reply by AxelTerizaki, -
- 2 replies
- 166 views
I have been able to get all my wheel images to load except Sonic 2 and Sonic 3 for some reason. Here's what I tried: -Making sure the .png name matches the rom exactly -making sure .png is lower case -Renaming the .png and then naming it back -checking with dons hyperspin list generator (it says each does have a wheel image) Anything else I could try?
Last reply by esoteric, -
- 3 replies
- 275 views
I have tried for weeks to solve my issue as to not clog up the forum with another "Easy question"... heres the situation, I have started an install from scratch and have all the latest versions, including the hyperlaunch (git) update. Dons tools tells me that all my rom names match, Starting with NES, followed install and set up to the letter, Hyperlaunch HQ will launch the rom, Hyperlaunch will also launch the rom, Hyperspin will not. "Cannot find rom..with any provided extension". triple checked HyperHQ and extensions are exactly as they should be... PLease help. Hyperspin Log: 11:34:07 AM | HyperSpin Started 11:34:07 AM | Going windowed mode 11:34:07 AM | C…
Last reply by vampirolatino2, -
- 11 replies
- 365 views
Hi, is there anyway to have only box art and no theme? I currently have all my nes boxart in Images/Artwork2 but they don't show up. Nes wheel art shows up fine.I used rom manager to make sure all roms,png matched the xml. I would prefer no theme at all just the wheel art with box art, I don't care much for videos. Anyway to do this?
Last reply by helltick1, -
- 3 replies
- 241 views
Looking to make a hyper spin setup for my tv.. with wireless pads.. I know nothing about hardware anymore.... wondered if the below could run Dreamcast down? what would it be able to do??? i appreciate any feedback! - i5 CPU ( model 660 – 3.33 GHz ) - 2GB DDR3 RAM (Upgradeable to 16GB) - 250GB HDD - DVD Drive - VGA and DisplayPort out - Windows 7 Pro 64-bit pre-installed and activated - Shipped with new USB keyboard and mouse, power and network cables. - Small Form Factor (SFF) casing. This is not as small as the tiny form factor PCs I sold a while back. But are still smaller than your average desktop. Dimensions are 12x4x14. Or de-case the PC for…
Last reply by demonseed, -
- 22 replies
- 3k views
hi people i tryed playing games from hyperspin and they don't work, all i get is a black screen. i've put the roms in the database file and the emulator but the damn thing still will not work. can somebody help me please? bless.
Last reply by northern24, -
- 10 replies
- 416 views
When in using Hyperspin for an extended period of time my emulators will stop loading altogether and the problem won't fix until I restart my computer. I've found that this Is due to Hyperlaunch not properly closing on emulator exits so I manually close it but the problem persists until restart. This happened before I changed which buttons close emulators through controls of HyperlaunchHQ which are Start + Select on any controller being used. So I'm stuck, any suggestions on why this is happening?
Last reply by JayDog, -
- 1 reply
- 191 views
Hi All, Looking for some help in adding / amending a few ahk files for some emulators, e.g Project64 (v1.6.1).ahk I have my vertical monitor in normal landscape view and have rotated mame, pinball fx2 and future pinball . Can anyone help with amending the ahk file to rotate an emulator on launch and then when exit rotate back to landscape ? If I can get this to work I'm thinking of using Hypermarquee to produce a bezel around the emulator to hide the background as I will not be able to run the emulators full screen Any help would be great. Thanks
Last reply by zorg2000k, -
- 5 replies
- 599 views
Hi, I have a weird problem that has recently come up on my arcade machine. While majority of the time i always play one player games. I had a few guys over to plat super street fighter 3. We all noticed that player 2 I had to change buttons 5 and 6 because they were not the same as player one, and or not working, so I reassigned them in the MAME options. The buttons works ok, however when we started playing for some reason the game loses focus and the screens jumps back to HyperSpin, we can still hear the game in the background. This messes everything up and I had to restart the machine. I am using the 2-player I-PAC. I use windows 8.1 as well. I think that maybe a few bu…
Last reply by esoteric, -
- 5 replies
- 343 views
this is my log the error is in red and at the bottom i just put hyper spin on my pc the roms wil play through hyper spin but only for a min then this and this does it on all emus and roms 16:34:04:051 | HL | INFO | +N/A | Main - HyperLaunch v3.1.0.3 BETA (www.hyperlaunch.net) 16:34:04:145 | HL | INFO | +93 | Main - System Specs: HyperLaunch Dir: C:\Hyperspin\HyperLaunch HyperLaunch is: 32-bit OS: Microsoft Windows 7 Ultimate SKU: Ultimate Total Memory: 3070.49 MB Free Memory: 1725.73 MB Used Memory: 1344.762 MB SystemType: 32-bit Physical Processors: 1 Logical Processors: 2 GPU 1 Name: AMD Radeon HD 6670 …
Last reply by marksc91, -
- 17 replies
- 441 views
Hi guys, I have dreamcast working nicely with demul, with one (major) problem, I can not get it to go into full screen. Any ideas? Config --> Video --> Use Fullscreen Enabled Tried different resolutions, stretch etc it always stays windowed. Any help please? EDIT - ALT Enter just stays in fullscreen for a split second and then returns to a window.
Last reply by showstopper, -
- 5 replies
- 343 views
I had NullDC setup to handle Sega Dreamcast (cdi,gdi) So I received the NullDC error [(“Unhandled exeption while initing image reader plugin by drk Raziel & Gigaherz (April 11 2012)] that seems to come out of nowhere after not using the system for awhile. I solved this issue by just re-extracting NullDC into it's folder again and overwriting any existing folders. I can confirm NullDC will run games outside of HS/HL without an issue. My problem comes when trying to run a game from HL, I receive the following error It's been a long time since setting up HS/HL and my global bezel setting is false and other systems run fine without an issue. I searched through the…
Last reply by vampirolatino2, -
- 2 replies
- 204 views
Hi As title says I don't wish to overwrite my mortal kombat 2 rom so how or is it possible to have two of the same roms so I can add the patch so have both of them in my mame section Thanks
Last reply by Beardedgamer23, -
- 3 replies
- 192 views
This just started happening this afternoon, it was working fine this morning. I launch Hyperspin, select an emulator, and Hyperspin completely closes.. I have no idea why. Anyone have suggestions?
Last reply by vampirolatino2, -
- 4 replies
- 2.1k views
Hi, I just configured my snes9x for SNES. Everything works fine so far, besides the save issue. I read on the forums, that HyperLaunch kills the emulator-process, instead of quitting it properly. So I need to configure HyperLaunch.ahk, so it sends Alt+F4 instead of CloseProcess. How do I do that? Can someone write me those few lines or link me to a thread with similar problem? I searched the forums for a long time, and found nothing related. Thanx. tpax
Last reply by potts43, -
- 3 replies
- 294 views
I can launch perfect with HyperLaunch, but not working in either Hyperspin or HyperlaunchHQ.. Anyone? [code] 08:11:17:987 | HL | INFO | +N/A | Main - HyperLaunch v3.1.0.4 BETA (www.hyperlaunch.net) 08:11:17:029 | HL | INFO | +47 | Main - System Specs: HyperLaunch Dir: C:\HyperSpin\HyperLaunch HyperLaunch is: 32-bit OS: Microsoft Windows 7 Enterprise SKU: Enterprise Total Memory: 8069.22 MB Free Memory: 6429.22 MB Used Memory: 1640.004 MB SystemType: 64-bit Physical Processors: 1 Logical Processors: 4 GPU 1 Name: Intel(R) HD Graphics 4600 GPU 1 RAM: 1024.00 MB GPU 1 Driver Version: 10.18.14.4080 Soun…
Last reply by marksc91,
