HyperSpin
Subforums
Emulators
- 15k posts
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
- jeu en double hyperspin
- Last reply by XenoDark787,
Support
- 23.6k posts
- 1 follower
Having problems with HyperSpin? You've come to the right place!
3,647 topics in this forum
-
- 0 replies
- 791 views
I haven't tinkered around with my arcade in quite some time, so I thought I would try and play some of the light gun games. After a bit of frustration, I've realized that the aimtrak guns work perfectly when I launch Area51 from MAME directly, but they go bananas when I try and launch it through HS as I would any other game. For example, the aiming is a bit shaky, and the first time I shoot off screen, the crosshair goes away completely. Has anybody else had this problem? Area51 has worked correctly many many times, so I'm not sure what happened! Furthermore, all other gun games seem to work just fine.
Last reply by coldcoffeecup, -
- 2 followers
- 5 replies
- 2.7k views
Does anybody know how to actually escape a game back to Hyperspin menu ? I have tried setting ALT+F4 and other settings in PC Launcher module but no luck. Is there a keyboard button i am missing that I can set to xpadder ? Its not escape as I tried that. Any help appreciated
Last reply by guyverjay, -
- 1 follower
- 5 replies
- 1.7k views
Hi all, I'm having an issue with a certain rom, Slap Fight (slapfigh.zip). When I tick the "Parent Only" option in Hyper HQ, Slap Fight disappears from my list in Hyperspin. There are 3 or 4 variations of Slap Fight but it seems as though it's not recognising any of them as parents. Any ideas? Thanks.
Last reply by thatman84, -
- 0 replies
- 1.5k views
Gents, I'm trying to configure Atari Lynx for Hyperspin via RL and apply a bezel. When I hit F1 to enter the RA menu it automatically goes full screen and I can adjust the view point to center within the bezel. I've edited the Atarti Lynx.cfg through the retroarch menu as well as manually and it continues to blow up full screen once the RA menu appears. Is this core designed specifically to run in Fullscreen? My .cfg is attached. Any help would be appreciated. Thanks in advance!! Atari Lynx.cfg UPDATE: Just FYI when I configure other systems/cores I get the green RetroArch menu. For this particular system is comes up blue as if I …
Last reply by missionplanner, -
- 2 followers
- 2 replies
- 1.7k views
Hi all, Got it all working perfectly except for this problem with emulator showing on the left of the screen when game starts and stays there (see image attached) Does anyone know how to stop this showing on top of the bezel ? Thanks in advance
Last reply by Creezz67, -
- 0 replies
- 817 views
I have been configuring HyperSpin after the initial setup and it is going well. MAME is fine and have all of the games I want. However, when I went to put NES on there, the emulator pops up in another window. I have the setting in HyperHQ that says "Execution: HyperLaunch", but it goes out of HyperSpin and then gives control to the Fceaux window instead of keeping in within HyperSpin like MAME does for the games. The games come up fine, but is this an issue with the emulator settings that I can change or the HyperSpin settings where I can get it to spawn the way the MAME ones do so it doesn't look like there is 2 windows open? Attached a screenshot to make it more c…
Last reply by wlandymore, -
- 1 follower
- 25 replies
- 14.1k views
Hi guys! I'm calling on the experts here. Upon recently updating HL-3 to rocketlauncher I have noticed that the "filter roms only" feature in hyperhq seems broken. I am aware that during the rocketlauncher update some of the hyperhq settings regarding the launcher were changed. I can get the rom filter working if I re-enter the full path to the roms and put in the rom extension (for only ONE rom extension). However it doesn't work if I put in 2 rom extensions (e.g. tape and disk extension for spectrum). I am separating the extensions in hyperhq by a comma and it still doesn't work. Rocketlauncher seems to use both extensions at once. Has anyone got a fix? …
Last reply by pdavis, -
- 4 replies
- 3.5k views
Hello again, I am in the process of updating my .xml database files and i am finding that some emulators are not recognizing as may roms as the old .xml files. Is this a naming issue, or are the entries just not included in the new .xml file? if it is a naming issue, are there tools to rename roms to match the names in the .xml file? Thanks in advance
Last reply by KillaBLK, -
- 1 follower
- 4 replies
- 1.3k views
Hi guys What needs to be done to have wheel sounds play? I have a NES wheel with a couple of hundred mp3 files in this folder: D:\HyperSpin\Media\Nintendo Entertainment System\Sound\Wheel Sounds The sounds play fine in HyperSpin. If I remove all of those sounds and replace with some WAVs I have created myself, they don't play. If I delete the WAVs and just pop in 1 or 2 of the original MP3 files I don't think they play. If I re-save the WAVs as MP3s they don't seem to play. Is there any documentation about this? I must be missing something or being daft! Do you need a certain number of sounds files in the folder? Do they have to be M…
Last reply by arcader, -
- 0 replies
- 820 views
This may be the wrong forum but I'm posting this on mobile and from a newly made account. Last year I created an account on hyperspins website and paid for a lifetime membership (I believe, it's been a year since I had to log back in). Well now when I try to login it tells me my account is waiting for approval and no further emails have been received or anything on my side. Is there something I may be doing wrong or is there an admin who can help? My display name on the acct in question is ashley1033. Thanks!
Last reply by Hallac, -
Dear all anyone can help me with a list of artwork properties in the xml for example <artwork4 x="500" y="355" s="0.3" r="3" time="0.5" delay ="0.5" type="ease" start="right" rest="none"/> what if I want to scale down the artwork,, is there a property for that ? type=ease is there other modes ?? is there a full list of this Thanks
Last reply by klexkavark, -
- 1 reply
- 931 views
Morning Guys! I've reached out to y'all because I've hit a wall in setting up my HS!!! Seems like once I fix one issue, another comes up. So...I'm desperately asking if ANYONE of you much more experienced HS users/programmers could "Remotely Access" my computer and help me finish my setup as well as address the issues i'm having. Your help would be greatly appreciated. Thanks, Dakin
Last reply by Metalzoic, -
- 3 replies
- 2.1k views
How can i stop WMP starting when Daemon Tools Mounts a Saturn Game..? Also the emu screen is taller than the Bezel, its ok at the top but is lower that than bezel, i have options set to Full Screen for Bezel and for SSF i notice you can adjust for this in an offset in the Module Setting but it just says make the number higher or lower and there is no number, so i don't know where my starting point is. And also the Bezels, Don't go to the bottom of the screen, my task bar is set on AutoHide but there's a small gap. Running Win 7 x64 The Last Hyperspin 3.? before it became Rocketlauncher And Hyperspin 1.3 not the new beta.
Last reply by RealGosthe, -
Hey Guys! Any idea why my HyperHQ KEEPS crashing? Thanks!
Last reply by Dakin23, -
- 1 follower
- 12 replies
- 2k views
Hello, Recently discovered Hyperspin and... wow. I'm all in on this one. (Thank you to everyone here, I've picked up a lot thus far) However I have one bottleneck as I'm building. I'm not sure how much storage space that I'll need. I will try to download as many sets as I can find and I have my eyes on everything from Atari - PS2/Gamecube; possibly even the Wii down the line. (I really want an AIO if possible) Anyone out there that's actually done this and could chime in on how much space I'll need? Maybe even a guesstimate? 10 TB? 20 TB?.... 30 TB? Thanks in advance if anyone has any input.
Last reply by thatman84, -
- 13 replies
- 5.4k views
I know this is the Hyperspin forums, but I made a frontend for my Capcom Big Blue cabinet, and I just thought I'd share it with others since it was so much work. Features: * Runs at any resolution (320x240 to 3840x2160 tested) * Works on 15khz arcade cabinet setups all the way through 4k resolution LCD monitors * Runs any commandline program and will not need to be updated to support any new emulator or game that comes out * Has 4:3 letterboxing for setups with widescreen monitors if that's what you're after * Includes a fully playable mini-game that 2 players can play to determine who gets control of the next game selection * Completely arbitrary game list order /…
Last reply by Metalzoic, -
- 8 replies
- 1.3k views
Hi there! Is it possible to hide emulators until you press a certain key? My example is that I only want MAME to be visible, but if you press a certain shift key set up through an ipac, the other installed emulators appear. Thanks!
Last reply by Metalzoic, -
- 0 replies
- 1.1k views
hello it's my honor to be a part of this great forum & his great hyperspin.exe i have use many emulators but hyperspin is the most beautifull Emulator Runner on Planet i have download many files from torrent & youtube but i need little help i hope u don't mind seniors here is Snap shoot i m little bit new at hyperspin plz don't mind if i asked many question about it why it is showing no launcher found when i m going to start any game
Last reply by asad, -
- 1 follower
- 0 replies
- 2.1k views
Hi Guys, I am having trouble with my display screen when i run some consoles, eg Master system, Megadrive, game gear and NES. the screen display is the upper left corner of the screen for the above systems. I have selected fullscreen in HyperspinHQ but noting seems to fix the issue The game gear bezel is working but the screen is in the right hand corner of the bezel I have selected true to the bezels being on and have tried them off as well. I have tried changing the fading settings with no luck. My SNES setting are the same as those above but it is running full screen with no dramas. …
Last reply by sheathes, -
- 1 follower
- 0 replies
- 723 views
So with RocketLauncher's fades, I can display the genre while loading a game, which is very cool, but what I'd really like is to display genre while browsing the games in HyperSpin. That way when I have friends over, they can stop on a game, see what genre it is, and know whether they want to try it out. I see that I can make it display the game title, publisher, and the year already. Is there a way to do this?
Last reply by SupraKarma, -
- 6 replies
- 4.4k views
Hi, HyperSpin newbie here. I'm prepping the software for the bits of my MAME cabinet in the mail on their way to me. Quick question. Is it possible to have the menu sounds mute themselves when attract mode kicks in? I'd like to be able to have the cabinet use attract mode like a screensaver for when I'm not playing, but only if it's not making random noises and playing music and audio from videos. Basically when I walk away, it keeps animations going on the screen to avoid burn-in, but doesn't blare away with sound.
Last reply by Metalzoic, -
- 0 replies
- 853 views
I'm using two wireless xbox 360 controllers on one windows/microsoft wireless receiver on windows 10. I'm running MAME .153 with Hyperspin/Rocketlauncher. I've also added the XARCADE_XBox360x4 script to my ctlr folder in MAME. The controllers work fine in Hyperspin and if I'm only running one controller it works great. When I connect the second controller, it seems to override controller 1. I can play two players by hitting start on controller1, but when the game starts both players use the second controller I connected. I find this really weird because I'm using the XARCADE script and I thought that would send the JOYCODE 1 and JOYCODE 2 controls to the individ…
Last reply by nwprecipice, -
HyperBase Live 1 2 3
by jhabers- 56 replies
- 16.2k views
I have brought up in the past few months that HyperBase Live would be introduced soon. HyperBase Live is under full development. I wanted to take a moment to start a discussion about the new technology that is going to be offered as well as answer any questions related to it. HyperBase Live will be a direct replacement for HyperSync, the current HyperBase website and the Downloads section of hyperspin-fe.com. HyperBase Live will truly be the single repository for all media related to HyperSpin. We will house all wheel, box, themes, sounds, hyper launch media etc....you name it, we will have it. The HyperBase Live team consists of myself and Chris Jackson (fr0stbyt3).…
Last reply by gargoyle67, -
- 2 replies
- 1k views
hello all. I could use a little help. had hyperspin collecting dust for a few months and now when i try to launch it, i get only the movie intro then a black screen. Rocket launcher UI and all the emulators launch and run fine but my Hyperspin front end seems to be the problem and im not sure what it is. I already check windows and my own anti virus and made sure hyperspin.exe and even the entire root folder of hyperspyn was an exception. This is my log. Any help will be appreciated. TIA 07:10:29 PM | HyperSpin Started 07:10:29 PM | Going FullScreen 07:10:29 PM | Checking for updates 07:10:29 PM | Update Check Complete 07:10:29 PM | Startup progr…
Last reply by Linkseo, -
- 1 follower
- 2 replies
- 1.8k views
So ive set Future Pinball up and have all the roms (tables) set it all up in RL (poiniting to the correct folders) but it wouldnt find any roms in the audit, then I realised the names were not matching to the RL table names, so I renamed a couple identically (as I cut and pasted the correct names from RL) then tried an audit to see if it brought up the 2 tables i'd just renamed and it didnt. Im all out of ideas if anyone has any that can help, please please let me know. Ive added some pics of my file paths etc..
Last reply by ticmike,
