Support
Having problems with HyperSpin? You've come to the right place!
4,027 topics in this forum
-
- 1 reply
- 27 views
I would like to dim the wheel to 100% transparency for just a few roms in a system is this possible? or is it a per system feature as per the hyperHQ settings? As i write this I am realizing this is probably baked into the specific theme for each rom... can anyone shed some light on how this is possible. I have created some basic themes for a few games in my Steam wheel can these be edited to include a transparent wheel? Thanks.
Last reply by Yeuxkes, -
- 8 replies
- 64 views
Hello everyone I have now been trying for the past day to get JoyToKey to work and although I thought I was close I still have a few issues. 1) When I first load HS and choose my required emulator i.e Neo Geo go in and select a game and press the button everything works fine. The Joystick works fine the buttons I have mapped all work fine even my genre and favourite buttons work and even if I hold down on the Joystick for 2 secs I can select a letter from the alphabet to choose. So everything works up until this point but its when I exit out of Hyperspin and then re-load it I have a problem. The JTK icon is still displayed in my task bar. So once I load up HS aga…
Last reply by Spawk, -
- 1 follower
- 10 replies
- 150 views
Hey guys I have not updated rl in couple months. I always hit no when it asks. Then I seem Austin posted a warning about updating as there was issues with fade? Seems every time I update something stops working. Should I be worried? I always think it will improve things but It seems to cause me headaches... In the past....
Last reply by demonseed, -
- 0 replies
- 12 views
Hi im looking for a version of nintendo "nes" xml. Back in the days here in Sweden we did not get to play all of the nes games. We had this general importer that quality checked ninteno games and decided if it was good enuf for the swedish market. The were called Bergsala. Because of this there is a load of games in the standard xml that i have never seen. I wold love a swedish version of the xml that would match my childhood memories. anyone got one?
Last reply by mange181, -
- 4 replies
- 48 views
Hi folks! im having issues with hyperspin. it lag and when stick is pushed to scroll to next game in hangs and just keep going. If the gamelist is long for the system it tend to lag more. in smaler lists it kinda ok. so im thinking about my harware. if its ok to run smooth or if i need to upgrade? im running win7. fresh and not mutch on. standard hdd (no sdd) intel Celeron 2.7ghz 2 gb ram grafic card: nvida gforce 230 As you can see nothing fancy. But what does hyperspin need?
Last reply by mange181, -
- 3 replies
- 33 views
hey guys I have a custom Hyperspin setup that starts simply into arcade classics which is my mame.xml. Within that single wheel I have Daphne and Mame games listed. My question is can you have a games display in multiple genres.. For instance .. I have a Genre listed as "Neo Geo Games" and a separate genre list called "Fighting Games", say I want King of Fighters to be listed in Both "Fighting Games" and "Neo Geo Games" Genres.. The xml shows one game listed in the Mame.xml file.. Is it simply a matter of the proper switches to allow that game to be listed in other genre wheels? Say... <description>King of Fighters</description> <g…
Last reply by Yeuxkes, -
- 3 replies
- 56 views
Will I have issues? Thanks!
Last reply by Tribe Fan, -
- 4 replies
- 91 views
I'm a super cheapo, so I'm wondering if you guys planning on any kind of Black Friday related promos to boost your user base?
Last reply by epayson85, -
- 4 replies
- 70 views
Hi all, just did an update with rocketlauncher and now when i try to play a game through hyperspin it says Cannot find C:RocketLauncher\RocketLauncherUI\Database\Nintendo Enterainment System\Nintendo Enterainment System.xml did this happen when i updated? How can i get RocketLauncher to find C:HyperSpin\Databse If any one can help Thanks.
Last reply by Metalzoic, -
- 1 reply
- 26 views
Hi all, I am way newbie in all this. I have been following they youtube vids from Simple Austin to set up a MAME system with Rockerlauncher/Hyperspin. They are very good. I have everything loading and almost working. My problem is I am using a X-Arcade controller with trackball, and he used a Xbox360 controller. When I load HS my left joystick moves the wheel up and down, L/R moves to next/past letter in alphabet. But none of the buttons select a game. Looking around in here, I can not even find listing of what functons HS has when it is running? How to select an emulator, How to select a game, how to select and start player one. Which button is fire/left right, e…
-
- 1 follower
- 4 replies
- 74 views
Hello I am trying to make a custom loading screen. All I want is a black screen. No sounds, no loading bar just a black screen. I am not sure how to set it up can some one explain>?
Last reply by heykool69, -
- 5 replies
- 89 views
I want to run hyperspin on my freshly installed win 7 x64 machine, but both latest 1.3 and 1.4 don't start at all. When looking in the windows event log, I see this error when trying to start hyperspin: Or the complete error: <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="SideBySide" /> <EventID Qualifiers="49409">59</EventID> <Level>2</Level> <Task>0</Task> <Keywords>0x80000000000000</Keywords> <TimeCreated SystemTime="2015-11-16T19:13:53.000000000Z" /> <EventRecordID>675</EventRecordID> <Channel>Application&…
Last reply by pinsanity, -
- 3 replies
- 45 views
Hello everyone, I was very close to end the hyperspin1.4 + rocketlauncher + groovymame configuration (with MAME, SNK, CAPCOM and SEGA GENESIS systems) and everything worked perfectly. In the last minute I decided to try installing the Commodore Amiga system and when I tried to test the other working systems appeared the error message "You did not supply any valid rom extensions..." (attached printscreen). Can anyone help me to fix and understand what might have happened? Thanks, Jose
Last reply by iNTiGOD, -
- 1 follower
- 4 replies
- 37 views
Is there a way that you can maybe have high scores from the community uploaded into mame? Would be fun having to beat proper players high scores rather than just beating your own
Last reply by damageinc86, -
- 0 replies
- 41 views
I was hoping there might be an IPAC expert out there in the Hyperspin forums. Here is my weird issue: My IPAC is all hooked and it tested great, I played some pacman to ensure all was right with the world. Now things aren't, sometimes the controls work great and other times not so much. When I say they don't work, the keys assigned to the buttons seem to change or just stop working. A great example is right on the joystick turns into Tab. Erica
Last reply by ArcadeGirl, -
- 3 replies
- 683 views
Hello everyone! I am having an issue where when I launch GroovyMame from a command line, it selects the correct video mode, like this: But when I launch it via HyperSpin, it selects a semi-random res, like this: In my mame.ini, I have "refresh_dont_care 1" and "lock_system_modes 0" set, so that's not it. I also posted this on the GroovyMame forums, but haven't gotten a reply yet. Though soemone here may have some insight! Thanks!
Last reply by vincefaro, -
- 1 reply
- 30 views
I was modifying the mame XML file, everything was going well, but after modifying the last game, in the log file it says this: 05:35:37 PM | HyperSpin Started 05:35:37 PM | Going windowed mode 05:35:37 PM | Checking for updates 05:35:37 PM | Update Check Complete 05:35:37 PM | Startup program unavailable 05:35:37 PM | Error intializing joysticks 05:35:37 PM | Menu Mode is multi 05:35:37 PM | Loading Main Menu.xml 05:35:37 PM | Main Menu.xml successfully loaded 05:35:38 PM | Main Menu wheel loaded successfully 05:35:39 PM | Loading MAME.xml 05:35:39 PM | MAME.xml is invalid 05:35:39 PM | ERROR IS Error #1085 Any ideas what error 1085 is?
Last reply by volumetric, -
- 1 reply
- 47 views
Ok i built a bartop arcade using my old laptop running xp. It is a old one and runs hyperspin ok. I deleted all the systems but mame for a real arcade feal. But i need a old mame module for my romset .139. My laptop wont run ewer versions of mame because of the graphics card. My .139 runs every game i need it to and it use to work on older versions of hyperspin. Does someone have the older mame modules so i can get this to work?
Last reply by fishman, -
- 3 replies
- 65 views
How can I chose which games to display as for instance in Mame? I went into the database directory for mame, opened the XML, and for the games I do not want shown I changed "yes" to "no" in enabled, but the games are still shown on the wheel. For instance, I want Pacman to be shown only, and not Puckman even though its the parent rom. Also how can I change the order of the games? I'd like to put together all the Pacman games (Jr, Ms, etc).
Last reply by Yeuxkes, -
- 2 replies
- 80 views
New day new problem , I followed a Youtube video from Austin to install the Amiga which all works great until I try to use the 360 controller. Its there in the config but wont work in the game, I tried to change the config to a keyboard but it seems to go back to the none working 360 controller everytime. Maybe the WinUAE is not compatible with windows 10 yet. My question is is there an easy way to configure the controller in WinUAE or failing that is there a different emulator for the Amiga? Thank you
Last reply by unkelo, -
- 3 replies
- 45 views
Nintendo Wii wheel will not show in my main menu... I have double checked the name and it is Nintendo Wii. I do not understand, I have tried a PNG file from a another system that I know works and it still does not show up? Also I would estimate every time I restart HS Mugen does not show? weird? Any suggestions
Last reply by demonseed, -
- 0 replies
- 38 views
Hi All, Apologies if I have posted my inquiry in the wrong forum. I have gotten most of my Emulator wheels up and running on my first Rocket launcher install (thanks to Simply Austins great Youtube Tutorials). I'm now in the process of trying to add Media wheels and was wondering if anyone on here has managed to install a wheel that can run Apps from the Program files/ WindowsApps folder? Thanks in advance! Graham
Last reply by GrahamKenny, -
- 0 replies
- 46 views
Hi guys I have just configured the ZINc emulater and it works fantastic I have mapped all controller settings in 1.9.5\ZiNcGUI.exe But when I run ZiNc through Hyperspin none of the buttons work I have made sure I have saved settings in 1.9.5\ZiNcGUI.exe if anyone has any idea's it would be great thanks in advance.
Last reply by keithpaw, -
- 0 replies
- 56 views
So I've been working on this computer with Hyperspin & Kodi off and on for a year now. I'm almost done except for conquering the issues with Project 64 in Super Nin. I see that Hyperspin and Rocket ll Launcher both have updates. I assume I would have to reinstall, and start all over. my question, is it worth it? Will it fix issues with Project 64 and other issues, or should I just keep going it's what I have so far? It's just a little discouraging thinking of starting all over again and reinstalling it. thank you for all input in any advice :-)
Last reply by Husky0628, -
- 1 reply
- 18 views
Hi from France ! I've just noticed that when I exit a console or handheld game, videos aren't shown anymore. It doesn't happen with MAME, just with console and handheld systems I have in Hyperspin. I use v1.4 and HyperLaunch 2.25c. Can someone help ? Thanks.
Last reply by James West,
