Cabinets and Projects
Show off, discuss, and workshop your cabinet or project here!
1,135 topics in this forum
-
- 1 follower
- 4 replies
- 2.9k views
I'm sure a lot of you already have this but I'm running this on my cab, a screensaver that installs into windows. its a 15 min full of clips of 80's arcades in action with sound. I really enjoy it playing when the cab isn't in game use. link:
Last reply by thenoob, -
- 0 replies
- 1.1k views
I'm on the last stage of my artwork... I'm okay at making vectors in PS, but I'm not an artist and I have just one final element to finish my cab - a castle as seen on the front of Bubble Symphony box. I've actually found the below vectorization of it, but the artist has only posted the JPEG and is unresponsive to my messages (which is unsurprising since it's from 2009). I've tried myself and it looks totally naff, and Vector Magic gets close but not close enough to work with the rest of the artwork (too jagged) So, are there any alternatives to Vector Magic, or would anyone is is good with vectors fancy lending me a hand!? It's literally the last…
Last reply by vaderag, -
- 9 replies
- 2.6k views
Well, I'm finally going to have some time to build my cabinet... took awhile, darn career getting in the way of my games! Anyway, I have several issues I'd like to hear opinions and advice on, but I just realized I left all my notes and schematics at work. I'll add more questions and corrections later, since my memory may not be 100% accurate. Basic design info: about 7 feet tall, 36" wide, and 36" deep (without control panel, which I plan on making removable). 4-player U360 with (10) rgb buttons per player, (2) aimtrak, (1) rgb trackball with (3) system rgb buttons. 40" LCD, 5.1 sound, secondary and tertiary LCD's, LCD marquee. Emulating arcade and console gam…
Last reply by devilFist, -
- 3 replies
- 3.1k views
Hey guys, First time poster, have learnt so much off this website already and was just chasing some information. I am building a 32inch slim build and most builds I have seen online use 18mm MDF on the side panels and the rest out of 16mm. I am in Australia and can not track down 18mm mdf without order twenty 2400x1200 sheets, My question is can I build the entire cab out of 16mm MDF which I'll be laminating? Thanks heaps Noca
Last reply by Barciela, -
- 13 replies
- 5.6k views
I would like to figure out what systems can play well with a joystick and 8 arcade buttons (plus coin and start). I think the list of systems it can't play well will be shorter. I understand that some people use analog joysticks which would change this but I'm talking about old school digital joysticks. So far these systems come to mind: Nintendo 64 Game Cube Wii PlayStation 2 I know I can use a XBOX 360 or PS3 controller to play these but let's face it, it's very uncool to pull out a handheld controller when you have an arcade cabinet.
Last reply by bigfraz5, -
- 2 followers
- 10 replies
- 2.7k views
I just had a really unreal experienced with a company that supplies you with all the gadgets you need to build your arcade. Can I share my story before saying company's name? What are the rules on that, Thanks. Rick
Last reply by Blade111, -
- 5 replies
- 2.3k views
Quick question for those of you who have added a Ultimarc Aim-trak light gun to their HS cabinet -- I realize an IR sensor needs to be mounted near the top edge of the monitor, but I want the installation to look as "clean" as possible. Assuming I de-case the sensor, how large of a hole will I need to poke through the bezel to accommodate each individual LED light bulb (I believe six small holes are required)? I guess what I'm asking is... What is the exact circumference of each small LED lightbulb? And how noticeable are the holes in the bezel? Thanks, Jim
Last reply by theaeon, -
- 3 followers
- 17 replies
- 11.6k views
Pedestal Super Arcade 100” screen LED Buttons I moved houses and sold my old arcade cabinet. This time I decided to go with a pedestal build. I have built a hyperpin cab and helped friends with some smaller 2 player builds but I wanted to go all out on this so I started with a new design I worked on digitally and then worked from there. This post will show the progression of the design and build: Specs: Computer: Gigabyte mobo Intel I3 16gigs of ram 500 gig ssd paired with 2 Terabyte hdd EVGA GTX 580 card from old PC Running Win 7 AC Infinity cabinet fan and temperature control system with Tstat LED Buttons and Joysticks all cu…
Last reply by rynoman03, -
- 31 replies
- 9.6k views
Working Progress.... After playing with Mame and Hyperspin I decided to have a go at building my own arcade cabinet did some researching and decided to go PC based instead of pcb board like Jamma or Pandora so I got my hands on a Aaeon all in one pc with Windows XP sp3 installed. I looked around for a flat pack cabinet and ended up with one from Rich's Bartop Arcade's as I wanted something small to have set up in the dining room, the parcel arrived well packed a couple days later So I opened up and 1st thoughts was VERY small but I did want a bar top set up so that’s what I got! The mdf was cut well so I set too with my sanding block and in an hour…
Last reply by Samorite, -
- 1 follower
- 30 replies
- 13.3k views
So i've just complete my NESPC build, figured I'd post the results and hardware here as some requested that I do. It was a really fun process where I learned a lot, got to do some fun modifications, and came out with what I think was a pretty good end result. My main goal was to build a PC inside of an NES case where everything was installed in a manner where I could easily add, remove, and upgrade components if needed while trying to leave the outside of the case as close to original as possible. Hardware List: 1 - Broken NES Case without dents/cracks - $14.99 1 - ASRock AM1H-ITX Motherboard - $59.99 1 - AMD Athalon 5350 - $53.99 1 - Samsung 256 GB Solid State Drive - $…
Last reply by Snakerake, -
- 1 reply
- 1.7k views
Has anyone around here tried a Hyperspin build run by a mini computer such as the one here: https://www.amazon.com/MINIX-NEO-Z83-4-Dual-Band-Technology/dp/B01M24W77N/ref=pd_sim_147_3?_encoding=UTF8&psc=1&refRID=TZ618GN2ZF1R8M3TXPZV I thought his might be a lower cost approach to building a bartop cab. I don't have spare PC components to build my own, and I used my only spare PC on my last cab. I've got a raspberryPi but I'm not a big fan of RetroPie, the version of Mame it runs is really old and it doesn't handle vector games well. Anyhow anyone with experience with one of these things?
Last reply by Nexus23, -
- 3 replies
- 2k views
I and my kids love the laser games and try to get it work with a wii controller. When i have a android phone it is no problem just download a app like mouse lite and then download ultimate control on your pc en bamn you can play the old laser games with your phone, but i like to try to get it work with a wii controller because its more the form of a gun. I think i can make with mdf and a wii controller a nice gun, i tried Touchmote and GlovePie and ppjoy, for me it is just trying right now to configure when i am ready with this i will shared with you, just saying that i love Arcade and try to get it simple for all
Last reply by BoOgieman, -
- 3 replies
- 1.4k views
I have a few cabs now but hyperspin keeps bringing me back to needle with tweaking my taito cocktail. I am not sure about what happened to the bottom of the cab as that part looks non original... but check out my YouTube channel for my arcade stuff... quick question tho, anyone know why a theme would be crashing in one wheel when the exact same theme in another wheel is ok?
Last reply by Samorite, -
- 25 replies
- 22.6k views
Well i just built my first mini hyperpin cab http://www.hyperspin-fe.com/forum/showthread.php?26494-My-Small-Hyperpin-Cab!-Tell-Me-what-you-think! so I said what the hell and decided to go ahead and build a HyperSpin cab while I'm at it. Designed after a "funglo/MonsterArcade Pedestal Cab" that i have been looking at for some time. I didnt want to dedicate my 40" lcd that that I also use on my driving cockpit that i build some years back so with a pedestal cab I can just move it back and forth. It's built out of 3/4" birch with led buttons, Paradise Arcade's RGB joysticks and also a 3" trackball. Ipac2 encoder and two led-wizs. They will control all the lights for the bu…
Last reply by boomerps2, -
- 18 replies
- 4.5k views
Hi Guys, spent a good amount of time now researching the bar top designs and I have found a very nice build. PVC looks like the best way to go but I guess the cheapest, easiest option is to try and find a kit?. Unfortunately I cannot find this exact one. Some are very close but slightly different on the control board angle or cutting lengths etc. Can anyone help me find this template/kit ? ebay used to have some cad drawings cheap for sale but I really want the same look as the image and also would need to source a company to cut the plastic. All new to me so any help/advice would be great.
Last reply by jonblaze21, -
- 0 replies
- 2.6k views
Good Morning Guys, I was just wondering if anyone out there had some bartop Photoshop or Illustrartor Bartop templates they would be happy to share (or can send me a link where i can find them) - I am just starting out with both programs as I really like the idea of creating my own artwork. Many thanks if you can help. Dogman
Last reply by Dogman213, -
- 2 replies
- 2.3k views
Morning All, Just wondered if anyone can recommend an reasonable illustrator and/or printer located in the uk to help me with my new project based on a Pacland remake. Pictures of cab attached - as you can see it's not too far away from needing artwork (on going I hope to do this for a living) ! If anyone out there can help - please get in touch, have most of the information including samples of the artwork style I would like to use ! i don't think too taxing but a fair bit of illustrator work ! Many thanks Dogman !
Last reply by Dogman213, -
- 2 replies
- 4.5k views
hi guys i live in Brazil , this very hard to find vewlix arcade projects , I want a project with plan for cnc in corel draw .dxf into vectors , can someone please help me...
Last reply by boomerps2, -
- 100 replies
- 22.9k views
Hello fellow Hyperspinners. It’s been a couple of years since I’ve been active here - back in the heyday when Bad Boy Bill was the driving force behind the site. I used to read every post, in every topic, perusing the site on a daily-basis. I’d love to know the story behind BBB leaving and where many of the admins are today, but alas, life goes on and people take on new interests. There seem to be a lot of great things happening around here between HyperLaunch, HyperSync and the upcoming HyperBase. It’s refreshing to see others picking up the reigns and making things happen. A fantastic job to those of you who have stuck with it throughout the years. Your dedicatio…
Last reply by ecb116, -
- 2 replies
- 1.4k views
Hi everyone! I remember first seeing Hyperspin around 2010. I was gobsmacked. What an awesome idea! I downloaded it straight away and started mocking up a setup to see what it looked like. The next time I saw my Dad I said "what do you think about building an arcade machine together?" He thought it sounded like a great idea and said we could do it quite easily. Fast forward 6 years and we're done! What a journey. I learned so much about tinkering with all parts of the software and hardware not to mention so many weekends in my Dad's shed learning how to use various tools, and more importantly how to patch up various mistakes I want to thank this community for he…
Last reply by ckeech, -
- 5 replies
- 1.6k views
OK, I have examined the various means of using MCM to make a better list for the arcade games to put in the computer to have an excellent experience for anyone who comes over----this has led to a question considering the myriad of bad dumps on MAME (no fault of the MAME team BTW) So the question stands------what is the best way to do this????? 1: Use MCM and the catver whatever list to remove the roms and adult games (I have younger family and that would rather suck---plus most of them are far from good) 2: use Don's tools and edit out the bad games like non working etc. including adult and those horrid mahjong and card games that are---…
Last reply by mikekim, -
- 7 replies
- 2.9k views
Hi , I have built a arcade cabinet and started with Raspberry pi3 and IPAC ULTIMATE and all worked ok. I have now just built a new pc with a ASUS STRIX 99 motherboard , broadwell e cpu , 16gb ram , 2 gig graphics card and windows 10 pro which is a fresh install not a upgrade. Hyperspin works fine with a normal keyboard but when I plug the usb in the pc from the IPAC or my IPAC ULTMATE the intro video of hyperspin goes low resolution and the selection wheel keeps spinning all the time . This is cured by removing the usb again and restart hyperspin. The results are the same with NO KEY SWITCHES even wired to the IPAC boards. I have even tested two standard keyboards c…
Last reply by 540itouring, -
- 11 replies
- 2.3k views
So I'm in the process of building my cab and just trying to work out how to hold my monitor in place... It's 27" dell, quite heavy. I'm thinking the two options are either use wood screwed into the vesa holes, or use straps... Anyone got any advice? Thanks!!
Last reply by pasappie1978, -
- 1 reply
- 2.5k views
Hello all, As I recently finished my Street Fighter 2 themed bartop which runs Hyperspin, I decided to share some materials with you The whole construction story is on my blog for those that are interested : https://www.bluemind.org/homemade-bartop-retrogaming/ Here are some photos of the finished product:
Last reply by jq_quint, -
- 8 replies
- 2.5k views
hello everyone just wanted to share my build in progress
Last reply by chefishman,
-
Popular Contributors
