HyperSpin
Subforums
Emulators
- 15k posts
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
- XBOX/XBOX 360 Attraction II Themes
- Last reply by Andyman,
Support
- 23.6k posts
- 1 follower
Having problems with HyperSpin? You've come to the right place!
- Wii "Flip controller" screen
- Last reply by Retrorewind,
3,638 topics in this forum
-
- 4 replies
- 1.1k views
Its been over a year since ive touched my machine and i forget how to stop hyperspin from running right away. I want it to log into windows first (wife wants to use it)
Last reply by Metalzoic, -
- 1 follower
- 17 replies
- 4.9k views
Hello, I'm having a cabinet built, I'm not sure how this all works, I know I will have a 500GB SSD for quick bootup running the OS, but I'm not sure if Hyperspin is placed on the SSD or if it will be on the secondary 6 TB drive that will hold games. I also see those WD white label 6TB drives for $159.99 which are 5700rpm and 64MB of cache, or the 5700rpm 128MB version which is $179.99. I'm worried that 5700 isn't fast enough and I would need 7200 for newer PC games, can you confirm if 5700 vs 7200 or 64MB Vs 128MB will make a difference or how it is setup. Potentially I would be playing newer gen PC games or PS2, but mostly arcade classic emulators. Thanks
-
- 1 follower
- 6 replies
- 1.4k views
Hi, I just noticed that every member of the forums gets a Title, How do you get these titles, Mine was Member now its Lurker. What does this mean? Is that bad? Sorry, i am very new to the forums. Did i do something bad?
Last reply by gigapig, -
- 20 replies
- 8.4k views
When I load up a game in Nintendo Wii U ( Cemu emulator 1.42) game starts ok and plays , yet about 30 seconds into game a module error comes up and says check you have correct version emulator. I have checked RocketLauncher settings and all seems ok. Is there any specific setting I am forgetting to change ? Thanks in advance
Last reply by BlackPredator72, -
- 1 reply
- 1.2k views
So I'm new to hyperspin and emulators... I started downloading everything I need to start build my hyperspiname arcade. Software? Check. Emulators? Check. Roms? Check. Now I keep crashing on memory. This is my pc Dell optiplex gx620 Fresh pny 450gb ssd C:/ Fresh 5tb wd blue D:/ with hyperspin/emu/etc Windows 7 64bit Went to the max 2gb x 2gb =4gb ram. How can I stop the system from memory crash?
Last reply by danwelsh, -
- 0 replies
- 1.2k views
hi guys! well since i change to W10 and updated HS with RL i had a couple of troubles to get everything to work again, just a few systems nothing serious, but now i'm having a lot of troubles with SSF emulator. i found out that i didn't need a SCSI virtual drive to play the games, i can use a DT virtual drive as well but i had the idea that i only can use SCSI with HyperSpin, anyway now when i push enter to play a Saturn game it doesn't do anything, i can see the RL logo on the task bar and then it close itself, the emulator works fine by itself and launching it through RocketLaucherUI it does mount the games and launches the emulator but this doesn't happen through Hyper…
Last reply by kratos_spartan, -
- 1 follower
- 3 replies
- 1.4k views
I know there are a couple threads going for HLSL in .174 now - I was just wondering if anyone has perfected the look for vector games? Please post your settings and pics. Thanks!!
Last reply by gigapig, -
- 1 reply
- 3.8k views
Hi guys! i need help, so i have Daemon Tools Lite 10.2 licensed of course, as in download section says that i have to set the path to DTAgent.exe that's what i did and nothing happens when i try to run SSF, is the only emulator that i have that needs to use DT, running it alone without Hyperspin works fine but of course i have to mount the image in a SCSI drive, the thing with this Daemon Tools is that is not like the older ones where you can create a virtual device, in this DT only creates one when you mount an image and when you close it the drive dissapears, i have windows 10 so there is no way i can use olders DT because the SPTD install file that uses those DT is not…
Last reply by kratos_spartan, -
- 2 replies
- 1.6k views
So nearly finished setting up my hyperspin systems but got future pinball to do cant sort the controls out is there a guide for controls?
Last reply by superbike2, -
- 1 follower
- 65 replies
- 48.4k views
I have a Mame cab that I got from someone running advancemame/advancemenu on linux. Works great for now, but advancemame is years behind mame and I had really planned for a different setup, so I'm in the process of collecting all of the latest files and graphics I need to do it the way I want. I plan on using Hyperspin for my front end after some serious evaluation, just signed up last week and downloaded a bunch of artwork and themes, now I just need to figure out what to do with it all! Anyway, I posted a question on the BYOAC forums about Mame clones, wondering if anyone had a list of clones that were better or different enough from the parent. I have all of the ro…
Last reply by Metalzoic, -
- 3 replies
- 3.8k views
Hi; I need a little help, I have Hyperspin up and running but I've notice some of the emulators(NES,SNES,and Segea Genesis) are running real slow/sluggish and the sound is real choppy. My MAME and other emulators are running perfectly but I can't figure out what's causing these emulators to not working correctly. Can somebody point me in the right direction. There has to be a setting that I can adjust or something. Thanks! Damon
Last reply by dmanc30, -
- 25 replies
- 14.2k views
Just wondering what emus you guys use for neo geo. I like winkawaks but I can never seem to get it to run properly through hyperspin. It seems to crash on start up or not boot full screen when it does. Though it runs brilliantly on its own and seems to be really compatible. So I currently use Nebula which runs well through HS but seems to be temperamental setting up controls and nearly always displays a error message while launching a game. Also the compatibility is not as good as winkawaks. So does anyone have any fixes for winkawaks or recommend another emulator that is better than both the above?
Last reply by TITCHGAMER, -
- 3 replies
- 4.7k views
Hey all; I'm still a newbie at HyperSpin. I have it all set up and running but I've run into an issue. I'm using a 40 in Samsung TV as a monitor with a very powerful graphics card(GTX 1080). My PC is a full gaming rig but I wanted Hyperspin on it also. After doing some research I realized that my display setting is way to high for some of the emulators such as MAME, NES, and SNES. so I have to manually go into my display settings to change it from 3840 X 2160 to something like 1366 X 768 screen resolutions before entering Hyperspin. Is there some where I can set to do this automatically? I found some information where you can do it through HyperHQ using the STARTUP/EXIT…
Last reply by BATTLEDONKEY, -
- 5 replies
- 1.6k views
My question in short; Is there a way to extend the time in which Hyperspin moves to the next random game in the list? -Or- until the video snap has finished playing? Why? I would like the Jukebox section to playout a video clip in full then randomize to the next video. P.S. Hyperspin still rules after all these years!
Last reply by superbeckmann, -
- 7 replies
- 2.9k views
Almost done my 32X pack! I've been releasing a ton of packs lately as you've seen. Just been in a creative mood as of late. What took the longest for this pack was the exclusive Megadrive 32X Pal and Japan cases as well as 2 out of 3 of the known prototypes. Didn't find good quality art for protos and had a tough time getting good scans for pal exclusives. I made do and ended up trying to create a template for the Pal ones that stayed close to the original so i'm fine with it. Here are some samples, thanks for your time!
Last reply by RetroKenesis, -
- 2 replies
- 2.1k views
I have tried some different stuff and searched but not 100% What does the use default option do under special art tab in hyperhq I do have a few more of these stupid qestions coming!!
Last reply by thatman84, -
- 1 follower
- 1 reply
- 943 views
Hi everybody, I've been collecting roms for a while with the intention of setting up a fancy hyperspin fe based retro gaming station. I do however have a few requirements I couldn't find obvious (best) answers to: 1) While I appreciate most hyperspin users being English speakers they would only want the official database to include games playable without knowledge of Japanese, but I'd like to include all Japanese versions of games, even if they exist in English. From some research here, it seems the best way to do this would be to set up separate Japanese systems. Can someone confirm that, and any tips on achieving that? 2) Would I still be able to maintain my co…
Last reply by Fahad, -
Which mini PC? 1 2
by nova13- 26 replies
- 18.1k views
Hi Guys I am planning an arcade cabinet and would like to know which kind of pc you use? I have heard about these mini pc's like VOYO, Raspberry pi etc. but I don't know if this is the way to go. I am a mac user but I saw that Hyperspin and mame better work on windows. Anyway...your input is appreciated. Thanks, Patrick
Last reply by Retro Goonie, -
- 9 replies
- 6.6k views
Hello, I am having problem launching Daphne. I know its some settings I'm getting wrong. I try following the steps on this site but I am missing something? Please help me or point me to the right direction. Thanks. Here is the Daphne_log: --DAPHNE version 1.0.12 --Command line is: daphne.exe lair_a vldp -framefile E:\hyperspin\Emulators\Daphne\framefile\lair.txt -blank_searches -min_seek_delay 1000 -seek_frames_per_ms 20 -homedir E:\hyperspin\Emulators\Daphne -bank 0 11111011 -bank 1 01100111 -nocrc -noissues -noserversend -sound_buffer 2048 -x 640 -y 480 --CPU : GenuineIntel 3100 MHz || Mem : 3968 megs --OS : Windows XP/.NET || Video : Intel® HD Graphics --OpenGL: …
Last reply by ro1and, -
- 3 replies
- 6.7k views
Hi guys! i'm having a problem when i try to launch Demul, using RocketLauncher, to play Naomi games, if i set the demul 0.5.8 ahk when i launch a game a message shows saying that "gpu plugin is not supported" i can't figure how to fix this, and if set demul 0.7 ahk this error shows up, plaease somebody who can tell me how to fix this so i can finish with this headache.
Last reply by kratos_spartan, -
- 5 replies
- 1.2k views
I have two pretty recent versions of MAME (167 and 174). When I attempt to launch a game (specifically all the Metal Slugs) directly in MAME I get the standard red box notification of missing CHD or parent roms. Which, I believe I have. However, when I launch any of these games directly from HyperSpin it starts no problem. I am just curious if anyone knows how and why that could be? An XML thing? Thanks! Matt
Last reply by Metalzoic, -
- 1 follower
- 0 replies
- 1.2k views
Hi all, so im trying to put together some tutorials to upload for approval and wanted to get some help with it if you can. Its a Hyperspin core tutorial but aimed towards Android users and people that dont have access to HyperHQ (Android users with only OSx PC's for example) Going to do this for the core settings files, Global Settings.ini, Main Menu.ini, Settings.ini and SYTEMNAME.ini Black Text = Setting Green Text = Example Value Red Text = Explanation Blue Text = Possible Values THIS IS A 1st DRAFT and needs soem editing by myself, but just need some of the blanks filling in if the community can help me out that would be awesome. Global setti…
Last reply by thatman84, -
- 4 replies
- 3.3k views
Hello, Getting a Cannot find D:/hyperspin\modules\system\system.ahk..... when launching through Hyperspin. Using rocketlauncher works fine though... :/ any help much appreciated, t
Last reply by thomas3120, -
- 2 replies
- 1.3k views
Been away for a while with upgrading. Just did the MAME .174. Any change between the Hyperspin 1.0 and the 1.3.3. Thanks anyone.
Last reply by 32assassin, -
- 1 reply
- 2k views
trying to setup mame with vert only games. have xml in hand and games are launching just fine, however i can't find anywhere to set it vertical in HyperHQ. Doing a search ai see there are themes supposedly on the ftp, but i can't find that info on the site. Even searching the forums and stickys, still can't locate it. can someone help me with this?
Last reply by Metalzoic,
