Cabinets and Projects
Show off, discuss, and workshop your cabinet or project here!
1,130 topics in this forum
-
- 5 replies
- 3.8k views
To start, let me say I have a bartop cabinet and I know that flipper buttons don't work well on some full size cabinets. After this disclaimer... These rock and make pinball games really enjoyable! My cabinet has been done for a short while but I just added the flipper buttons over the weekend. I've had them since I built the cabinet but wasn't sure how I wanted to wire them or if I even wanted them on the sides. I was playing pinball games with the topside CP buttons but, as you can image, it just wasn't the same. If you don't need to bear hug your control panel (on a large full size CP), these are a super cheap way to get the old school pinball feel!. You can ev…
Last reply by newoski, -
- 5 replies
- 4.4k views
.
Last reply by iNTiGOD, -
- 1 reply
- 1.4k views
advice for new user for Hyperspin
Last reply by NewYears1978, -
- 4 replies
- 2.4k views
This is my project, I am thinking of changing some details . But I want to do it in 3 parts . The bottom just like support, the top would all hardware, and also controls separated. All parts fitting together like Lego pieces. I used 3ds max and photoshop .
Last reply by elmorios, -
- 1 follower
- 49 replies
- 10.9k views
Whats up! I posted over on BYOAC but thought I'd broaden my horizons for input over here. Long story short, my first hyperspin cabinet is gone, sold to the brother in law for cost of materials. Looking to build a more polished machine than the first one. Not that it was bad, but just spend a bit more time on the carpentry and design of it. There is a fella over on those forums who I owe a lot of credit to, OND. He has a thread over there that shows step by step how to build a machine, with plans. I'm taking some of his ideas, some of mine, and trying to tie it all together with some artwork yet to be decided. New design, like I said I'm not sure on a…
Last reply by kuwaiti, -
- 12 replies
- 3k views
trying out some new artwork.
Last reply by grahamken, -
- 1 follower
- 6 replies
- 1.9k views
Considering building a new CP or maybe a new cab that is more versatile. I like the idea of small analog nubs in addition to a standard arcade joystick and buttons in a cab. This would allow a smaller CP with a lot more function. You could play every arcade game, PS2, GameCube, N64, etc. from a cab and not need external controllers. These "nubs" could be taken from a controller or bought raw at a low cost. Here are my points: 1) real all-in-one cab without obnoxious or huge CP 2) could leverage analog for gun games and mouse 3) 1 U360 controller cost $60 US and these are under $5 4) can easily fit these little guys in almost anywhere (great for retrofits) 5) play…
Last reply by gigapig, -
- 1 reply
- 2.4k views
Not sure why I didn't know this before but I found out MAME supported dual monitors while trying to figure out how to get HLSL set up (which I couldn't get working) Once I got the monitor order right I went right to Super Punchout. One day I'll get the second monitor displaying marquees but for now, this makes me super happy.
Last reply by HyperGuy2016, -
- 2 followers
- 15 replies
- 10.3k views
Hello all, This will be a work in progress....I have had requests to do this mod for a member so I will document it here for you all. I'll start out with some teaser pics for now...Being that I had gotten these this week and it's mothers day this weekend I don't think I'll get time to do any modding...if I do get a chance to do some I'll be sure to post updates. Anyway here is some eye candy!!
Last reply by bobmoo79, -
- 2 replies
- 1.9k views
Hello, To anyone who maybe interested I just recently set up a twitch/live stream on my arcade cabinet, it primarily features retro arcade and console games but should include a bit of everything. For now it's mainly just for fun and to hopefully capture some "golden runs" should my friends and I perform any great feats of gaming prowess. Eventually I'll probably make some of the videos into more formal game reviews or tip/tricks/walk through's. I make at least a few videos a week, and frequently have friends over for drinks and games on weekends. www.twitchtv.com/dark0verseer
Last reply by madhatter3339, -
xeon build?
by blade- 3 replies
- 2.2k views
Hi guys new year coming and so is a new build firstly before I go on this journey of thumb smacking and solder burns I like to collect pieces for my build.Right I have purchased a decent priced screen and was considering pc's when I was offered a xeon I know a bit about the i series machines quads etc but I know nothing about this xeon stuff it's a ex coperate machine seems high spec but will it run gamecube taito type x2 etc..let me know because it's fairly cheap here are the specs. Hp z400 intel xeon quad core ht (turbo)?? 2.66ghzx4 12gb ddr3 pc 10600-1333mhz 128gb ssd + 1tb secondary drive Nvidia gt 730 2gb Apparently same as i7 930.let us know guys before I dive…
Last reply by Tookie, -
- 9 replies
- 2.8k views
Hi Folks, Not posted for a while but have been busy building a machine for a mate and I thought i'd share it with you. So story goes like this.... A few years back I bought x2 old gambling machines (1st pic), which I then promply converted into a games machine for the kids (2nd pic)... They have enjoyed many hours on this over the last year or so. So only a few weeks back my mate was in my garage and asked what i was doing with the other machine and joked about me converting it for his kids (him really).... So the build began... The following pics are a dump in order of the progress to date...Apologies for the lack of text between pics I'll update t…
Last reply by jq_quint, -
- 1 reply
- 1.5k views
I usually build full sized cabs with 2 8-way sticks but my sis only plays the older games when she uses my cab so I decided to make her a mini cab, tabletop style, using just a single 4 way HAPP stick. I found a list of games below that are natively 4 way and I had in my head the whole time that I only needed 2 buttons but then someone on the forum brought up Asteroids which uses 3 buttons (fire, thrust and hyperwarp). Does anyone know if 3 will be the right number or should I add a fourth for that unknown game that may need it? As with all my cabs, I'll be adding a P1, P2, Coin1, Coin2 and pause buttons as well. Thanks for your comments. Also feel free to add to the list…
Last reply by newoski, -
- 16 replies
- 3.3k views
Hey Guys, Just Started my first build and thought i'd share the progress. Super excited how its coming out, its not perfect but we got a lot accomplished so far in just 4 hours. Hoping to get the rest completed shortly and ready for paint and primer. Iam sure ill have some questions along the way that I hope some of you may be able to help with. http://imgur.com/a/Wn09S
Last reply by joeyjojojjjjjj, -
- 5 replies
- 4k views
How are people switching between digital and analog control configurations on newer arcade systems (such as Sega Naomi)? Obviously if you use a X360 or PS3 controller this isn't a problem but if you only have one joystick then you need to program it for digital on some games and analog on other games. Is there an automated way to do this? I know it can be done using per game configurations in the emulators or using per game changes in RL. Is there another, better way? Can I easily tell it just to use digital or analog? How do you handle this on your cabinet today?
Last reply by progets, -
- 1 reply
- 1.7k views
Hi all! Running Hyperspin frontend with a few console emus, U64, VP and PC HotD2 + 2 Aimtrak lightguns Thanks to the community for making me wiser. http://www.bartmegens.nl
Last reply by JSinn, -
- 3 replies
- 1.7k views
Decided to crank out a few 2 player machines. I printed up my own marquee and artwork too. quad core PC with 4gb ram.
Last reply by jq_quint, -
- 5 replies
- 4k views
Here is a link to my build gallery: http://imgur.com/gallery/fer2m
Last reply by Tribe Fan, -
- 20 replies
- 3.8k views
As the title states, my build shall start. Nothing exciting for now just ordered all my hardware, buttons, interface, led controller, etc. I will be running this with an Intel board DB75EN has an i5-3470 8gb of ram running windows 7 I will be buying a video card that supports hdmi output. Still unsure what size monitor aka tv to go with as this will be a pedestal arcade. Already have the cabinet designed and in Aspire (CNC cutting software) just need to take the mdf to the workshop to cut it out. Started to play a little bit with graphics. Thought it would be cool to have a marquee over the tv even though its a pedestal arcade. Building a box with a light to make it loo…
Last reply by Reefboi16, -
- 5 replies
- 2k views
It was a Oldie... it looks to be a Midway cab. The old PCB and both power supplies are shot along with the Tube. So I decide to do a Hyperspin Cab. I am planning on putting in a AMD quadcore with 4 gigs of ram and a 1tb drive. do I really need a Video card tho? Im confused do I use onboard or a add on card? Id like to play some of the NEWER games. but what games require hardware acceleration? and should I be concerned with Heat? should I leave the PC in the case or mount it to the wall of the Cab? http://imgur.com/a/HVsW6 The tube is deff toast... should I save anything off it?
Last reply by AlexDC22, -
- 14 replies
- 10.4k views
Hi, I bought for some months ago a Naomi Virtua Striker 4 2006 Cabinet for 220€. Wanted to rebuild it to an Mame Cab. The first job in my todo list was to change the CRT I found a used rarely Philips 29 PT 9521 73,7 cm (29 Zoll) 4:3 100 Hertz PIXEL PLUS with 720p/1080i for 50€ But i was disappointed about the Video Quality. For Games it was ok . It wasnt pixelate but for configuration of mame in windows mode at 1080i or 720p it wasnt sharp enough. So i decided to change the CRT with an LCD. I bought a used 26" LCD with guarantee and 720p<for 110€. SAMSUNG 26" FLAT TV LCD ,HDMI, 16:9 , Chinch, Scart, VGA, HF, OSD, HD Ready ... It was easy to fit the LCD…
Last reply by AlexDC22, -
- 4 replies
- 1.9k views
Made myself a new toy over the past month. It plays all four and three player games about 100 in total. Here are some features. All 4 Player Games All 3 Player Games Jukebox Hyperspin Theatre Saturday Morning Cartoons 12" Subwoofer with RF amp Illuminated Music Reactive t-molding Custom Art all around Color correct joysticks for TMNT Pushbutton coinslots LED Marquee light and 3 easter egg games Pics http://imgur.com/a/mXgqQ Menu Video
Last reply by daronthomas64, -
- 0 replies
- 1.8k views
<?xml version="1.0"?> <menu> <header> <listname>MAME</listname> <lastlistupdate>06/03/2012</lastlistupdate> <listversion>.146 Ongoing</listversion> <exporterversion>HyperList XML Exporter Version 1.3 Copywrite © 2009-2011 William Strong</exporterversion> </header> <game name="dino" index="" image=""> <description>Cadillacs and Dinosaurs (World 930201)</description> <cloneof></cloneof> <crc></crc> <manufacturer>Capcom</manufacturer> <year>1993</year> <genre>Beat-'Em-Up</genre> <rating>AAMA - Yellow (Anima…
Last reply by alexandreb63, -
- 1 follower
- 20 replies
- 5.8k views
Its in need of a bit of a polishing around the sides, but is now up and running... Yes that is a beer fridge built into the base! Update, bought second hand Xbox 360 remotes (retro joystick just not suited for N64 and Dreamcast) and have stripped and replaced with mod kit to match unit colour
Last reply by Lucky1, -
- 2 replies
- 1.8k views
My complete Arcade Cabinet. Pretty happy with the turnout. Plenty of resources for this too for anyone interested; AutoCAD templates for plywood sheets, SKP file w/ material schedule. Easy way to budget. 5 emulators right now, 3700 roms I think, its always changing. Red vs Blue theme with my graphics. Need to do an x-arcade cover graphic and buttons to match the theme as well as a coin door but I want to re-fab and selections are junk where I'm from. I have a ton more pictures of details as well, but on to just some main pics. only lit up photo I have right now... Some build progress photos... 4:3 CRT TV, I really like the retro rounded gl…
Last reply by itsforthebug,
-
Popular Contributors
