HyperSpin
Subforums
Emulators
- 15k posts
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
Support
- 23.6k posts
- 1 follower
Having problems with HyperSpin? You've come to the right place!
3,646 topics in this forum
-
- 0 replies
- 1k views
Just curious if anyone has a mondohub? I was thinking of getting one just to plug all my different controllers in, and then some! lol. i'm already running out of USB ports on my PC and on the expansion cards i have installed.
Last reply by damageinc86, -
- 12 replies
- 4.1k views
Hello, I am fully aware I may be 'taking the piss' a little when requesting this. but thought I would extend my imagination out there a bit ;-) kaillera... imagion you and a freind had cabinets at your homes, could you imagion built in webcams, with voice-over-ip so you can speak and see eachother while playing? and if you connect to someone elses "hyperspin" application you could take control of what game to play next by choosing the game. maybe a bit of argument would be included lol. and then when you launch the emu, it somehow auto-logs into kaillera and starts you playing together? to me that sounds amazing, to a developer that would leave them scratching there hea…
Last reply by damageinc86, -
- 7 replies
- 2.8k views
Hello, i am building a bartop out of some old computer parts which are left over from my last pc. It´s like: ASROCK G31M-GS R2.0 2 Gig G-Skill DDR2 800 Intel E8400 3.0GhZ DualCore 700W BeQuiet Geforce 650 GTX I want to play everything till dreamcast. maybe some PC-Games like Mortal Kombat. Do you think this sxstem will be enough or should i replace the 2GB ram with 4 or 8? Thanks for your answers
Last reply by Ridu83, -
- 5 replies
- 1.9k views
Hello, still playing with the camputers lynx system Rather than making a bezel with the xpadder profile on it for each game I decided to play around with the module and see if I could simply use the module to restore and position the xpadder window on the screen as well as re-position the emulator (and hide menu bar and title bar) I think its pretty cool. I have bezels off. I have hide desktop and hide frontend to true. I have fade OFF The module positions the emulator window off to the left and then hides the menu bar and title bar....so it kinda looks like it in a bezel anyway. (but not a fancy one or anything) and then the xpadder active window is positioned o…
Last reply by craiganderson, -
- 1 reply
- 933 views
Hello, I'm working on themes/videos etc for camputers lynx thanks to this great new emulator being available. http://jynx-emulator.tumblr.com/ http://jynx-emulator.tumblr.com/ http://jynx-emulator.tumblr.com/ http://jynx-emulator.tumblr.com/ The author was kind enough to combine the roms of "Dungeon Adventure," however there are additional sets of roms/tape that need to be combined in order to play on the emulator from what I understand. I do not know how to do that. If somebody does, and would like to combine them please let me know. Thank you very much either way craig
Last reply by dragon57, -
- 93 replies
- 14.2k views
What is your SO's attitude about you and hyperspin? Does he or she dig it, love it, loathe it, not care? What's the story? Have you set up the emulator of love or you just can't make it sync? ; ) Sent from my iPhone using Tapatalk
Last reply by SORHP, -
- 2 replies
- 1.4k views
Cant seem to DL hyperspin because of lack of security tokens. How does one acquire security tokens? Cheers, Merc
Last reply by albert_c, -
- 11 replies
- 5.1k views
Because I can't focus on one system the minute I see a game on another (I blame Game Sack,) I have been poking into some Japan-only Saturn releases and came up to KoF '95. I understand it predates the RAM carts (which SSF can handle just fine) and requires the ROM cart. Apparently only two (or three?) unique titles ever made use of it. I found the .bin for it, but obviously Hyperspin would need it to share the game's title (King of Fighters '95, The (Europe)) and I'm not sure how to make that play nice with the file system since there'd be two .bin with that file name. I suppose I can combine the actual game files into an ISO though. This is assuming SSF can even use…
Last reply by pavlovtiger, -
- 14 replies
- 3k views
Perhaps I am wrong......but It seems as though there are additional sega model 3 games that are not included in the hyperlist database file. Emergency Call Ambulance -- for example does anybody have an updated database file? thank you in advance craig
Last reply by SIMPLYAUSTIN, -
- 26 replies
- 11.9k views
I'm currently running a compiled no nag/working version of MAME 0.148, which I compiled myself (never done it before). So I've been looking around for a compiled no nag version of 0.149 (granted it's only just been released) but I've been reading of people having problems as there have been some major changes. This is taken from Techspot. __What's New:__ IMPORTANT NOTE: As of this release of MAME, several important things about the system have changed. Please read the following items before attempting to compile this new version. A new tool chain for Windows, based off of gcc 4.4.3 prerelease, is now REQUIRED. Go to http://mamedev.org/tools to get the new tools. …
Last reply by ninja2bceen, -
- 1 reply
- 1k views
http://www.greatesthitsremixed.com/ . . kD-qdD27ElI
Last reply by Fromlostdays, -
- 3 replies
- 1.8k views
it looks like the HyperSpin Install Files v1.3.2.0.zip contain the latest and greatest : HyperSpin.exe 7.97 MB (8,365,315 bytes) created : Friday, April 19, 2013, 2:46:05 PM HyperHQ.exe 8.21 MB (8,618,507 bytes) created : Friday, April 19, 2013, 2:46:05 PM HyperTheme.exe 11.4 MB (12,045,448 bytes) created : Friday, April 19, 2013, 2:46:05 PM modified : Saturday, August 14, 2010, 12:02:44 PM so no reason to overwrite those, correct? Just rrying to make sure I have latest and greatest versions of HyperSpin, HyperHQ, HyperTheme and HyperSync Cloud. I realize HyperSync Cloud will auto update but before I set it up, the HyperSpin Install …
Last reply by albert_c, -
- 12 replies
- 3.1k views
For my Hyperspin setup I use an HTPC in the living room. I use wired PS2 controllers and wireless 360 pads depending on system/game. I plan on getting 2 Q2Pro Arcade Sticks too but before that I was looking at a DualShock 4 as that could retire the 360 and PS2 pads in one swoop. So some questions 1) I know the DS4 and Wiimotes when setup are tied to a single BT dongle, which begs the question, can you run both on the same system using 2 BT dongles? Has anyone tried this? Would be a shame if Wii was forever ruled out if I went the DS4 route. Wiimotes aren't much use for my HTPC right now as it just isn't powerful enough for Wii games so I use my main PC for them but…
Last reply by Runadumb, -
- 5 replies
- 5.9k views
I've struggled for two hours tonight trying to get SSF to display over the entire screen. Not a block at the centre of the screen, with black bars on all four sides, I want the entire screen and I know the bloody thing can do it because I had it working earlier. I don't remember what I did, which settings I had or which ones (apparently) got altered or deleted, but it -refuses- to stretch the entire screen now, no matter what I try. I've outright seen it delete the settings I put it by hand, at random, so I don't understand what to do anymore. I looked in the AHK, and in both SSF.ini files, the one in the emulator directory and the one in Hyperspin's. I do -not- unde…
Last reply by pavlovtiger, -
- 5 replies
- 2.4k views
Hello hyperspinners, I have been a bit inactive for the last 6 months but I'm ready to jump back into hyperspin with a brand new hardware and software setup! *Psyched So ready as i am i jump to the hyperspin website again and expect some clear step per step manual how to install and configure everything from the beginning: hyperspin, hyperlaunch, emulators, roms, hypersync, hyperpause, ... And after 10 minutes of browsing I notice that all information is still spread out on different locations, a guide forum sticky here, hyperwiki and docs page there, and I'm lost again. What is the best source of setting up and configuring everything? Or if there is no such thing as a …
Last reply by jeanvion, -
- 5 replies
- 1.4k views
Hi Guys, I'm experiencing a "pop" sound when I load a lot of games. Happens on multiple systems. An example would be 005 on MAME 0.153. Is this normal? Thanks, Owen
Last reply by albert_c, -
- 2 replies
- 2.5k views
Whuttup Hyperspin peeps. It's been a long time since i've posted here, but I thought this was worth it. Recent developments have very much changed the status of these classic games. Raiden II & Raiden DX are now (pretty much) playable in MAME. Emulation is far from complete, & redumps are needed, but for long time emulation fans this is a pretty big deal. The more impatient amongst us (like me) shold check out the SVN updates, which are being regularly updated. Or if you can wait, 0.155 should be a biggy. Other cool stuff is currently happening too, but those Raiden games are looooooong awaited. Luckily for you folks, Mr Mamesick has upped builds here for …
Last reply by albert_c, -
- 4 replies
- 5k views
Hi Folks! I'm new to Hyperspin and I'm loving it. I've run into a frustrating issues, though with preview videos. I just singed up for an EmuMovies account, got HyperSync setup and downloaded preview videos for NES. I directed to the correct media folder in HyperHQ but when I boot up Hyperspin, I get the same Green pixelated video screen I did before I had any videos. I did some searching on similar threads. I downloaded the newest K-Lite Codec pack which didn't help anything. THe MP4 videos open fine in VLC or WMP, but just don't seem to render in Hyperspin. Screenshots attached. Any help is appreciated!!
Last reply by Agrajag, -
- 5 replies
- 2.2k views
Hi Everyone, First post on the forum. I am working on my hyperspin setup and I found a program that updated all the ini files etc from the database. I accidentally deleted this program though and I have spent hours looking for it to redownload it. Does anyone know the name and link to download the program that updates the ini files from the database automatically? I would greatly appreciate it. Thanks, Mike
Last reply by firebirdocz, -
- 231 replies
- 65.9k views
I just really think this monitor is really cool, Ive never seen one like it and I've been looking for something like this for a while now. Its a marquee shaped monitor I can use for dynamic marquees in HS but life size. The monitor is 29" 30" wide x 12" high 17:6 aspect ratio Wish me luck on my marquee ventures, I will program an interface to HS to show the next games marquee or whatever i want on the screen. This blows betabrite out of the water. I will build this into my upcoming HS 2.0 cab project. Should be coming in the mail in a few days.
Last reply by AtariMaster, -
- 16 replies
- 11.5k views
So, apparently byuu has changed the name of "bsnes" to "higan" and has released a new version accordingly with the new name. So... for those of you whom use bsnes, now you get higan. same thing just different name. higan (bsnes) 0.92 is now released. Not sure why the name change, but I liked the original name. Higan is a Japanese holiday for Buddhists. I think from Spring to Autumn. Hope it is not a temporary name from spring to autumn.
Last reply by ninja2bceen, -
- 8 replies
- 5.5k views
All, I am considering building my first cabinet. This is probably a dumb question but do I mount the 4:3 monitor horizontal or vertical (on its side)? I had an arcade a few years ago that had a vertical screen but didn't know which way works best for MAME games. Thanks, Andy
Last reply by AtariMaster, -
- 2 replies
- 4.3k views
I'm back to work finishing up my cabinet after some time away from my project and would like to know the easiest way to map all the buttons universally to all emulators. I am using an ipac and the mame default key code set up. If anyone knows of a tutorial or where I could find the info would be much appreciated. Thanks!!!
Last reply by homer41, -
- 13 replies
- 4.2k views
Hi, I just purchased a mini cabinet and I'm new to this so I'm pretty noobie here. Please bare with me. Thanks! (GlovePIE wouldn't allow me to register for some reason so I hope you guys can help me here.) I just installed sacred citadel and trying to setup virtual game pad so I could play co-op locally. I also added 2 mice so I have 3 extra buttons to use for each player. I have already setup using ppjoy, xbox360ce and found the script for glovepie that let me uses 2 game pads and 2 mice at the same time. My question is how do I setup the left analog stick to up, right , left, down? Ppjoy1.analog0 = key.right - would give me right direction Ppjoy1.analog1 = key.…
Last reply by ghutch92, -
- 2 replies
- 1.9k views
Hi there. I use Hyperspin in non fullscreen mode and I was wondering is there a way to show window borders (close, maximize, minimize buttons etc)?
Last reply by albert_c,
