HyperSpin
Subforums
Emulators
- 15.1k posts
Need help setting up specific emulator in HyperSpin? Check the Tutorials section first and then post your questions here.
- donde consigo los módulos ahk?
- Last reply by jesfknkrys,
Support
- 23.6k posts
- 1 follower
Having problems with HyperSpin? You've come to the right place!
3,651 topics in this forum
-
- 4 replies
- 2k views
The menu is not very smooth on my 60hz TV. I can see the assets stutter as they move. I can also see screen tearing sometimes, despite having V-Sync enabled in the Nvidia settings. And the videos also stutter a lot (i use high-quality emumovies snaps). Tried everything in the optimize settings menu but doesn't change anything. I use the full-screen setting because the windowed setting is even worse! When i use the 240hz monitor, the menu and videos are smoother. But still not as smooth as other frontends like how in ES, the videos run at 60fps. In HS they only run at 30. The problem is also a bit less annoying if i use my Windows 7 partition. It stil…
Last reply by Sledge, -
- 1 follower
- 1 reply
- 1.6k views
Hello, I used to use hyperspin a few years ago and am recently getting back into it. Everything is setup, except for ways to enter and exit the games. I have an arcade control panel and there are 2 buttons I want to use for entering and exiting the games, systems and emulator. Before I was able to configure the buttons in hyperspin for the enter and exit keys. I have a Ipac 2 and have configured it so those buttons are enter and esc. Do I use hyper launch to configure this, or something else? Right now it the player 1 button is enter, which is mapped to the 1 key. Thanks for all the help.
Last reply by gigapig, -
- 2 replies
- 1.4k views
I have watched a lot of videos and have tried many different things mainly in HQ, but I cannot figure out how to exit out of hyperspin back to my desktop with a button. I can hit the windows button on keyboard and then control/alt/delete, but i really want to use my arcade pedestal to exit. Please help! The second issue and I do not know what it is called, but when I am turning the wheel on Mame one of the games is called pocketgal deluxe. There is literally a full blown naked real woman as the background showing everything. I have kids so I want to delete this. The person who built my cabinet is unresponsive which is a longer story, but when i try to go into to the …
Last reply by crawfishboilking, -
- 3 replies
- 1.7k views
Hi there, as the title suggests I need your help with adjusting the number of games displayed simultaneously in the wheel. To be clear, I am not referring to the "rom only" or "theme only" type options. What I am referring to specially is for example when using the default half circle style on the right hand side there are basically 11 games shown on the screen. You have the game selected in the center, and then 5 below it, and 5 above it. Going further, using a horizontal theme it seems to default to 5 games shown. The game selected in the center, and then 2 on the left, and 2 on the right. I've attached two images for examples showing exactly what I am referri…
Last reply by skizzosjt, -
- 0 replies
- 1.1k views
Hello Guys i've downloaded the databases for NES and SNES. At the same time i've downloaded the media for that database and i found some games that doesnt have wheel neither theme. I looked at names of files and some of them have (REV A) in the name of the wheel files and theme files, and those games listed on database XML doesn't have this. The database files are outdated or there is a way that the media locates the names of the roms without the (REV A) in the name? Thanks in Advance
Last reply by danikaos, -
- 1 follower
- 1 reply
- 1.3k views
I'd like to put some of the AAE games into MAME playing them when accessing them through Hyperspin's MAME. Is there a way to do that? If so how?
Last reply by gigapig, -
- 2 replies
- 1.3k views
Hello dark13, I introduce myself I'm Kid_ITALY, for friends just Kid ... So basically I start by telling you that you are very good at using animation programs. I am working on your old but beautiful project for me (On this Video of yours: https://www.youtube.com/watch?v=eWpqa6Y6vTA ). In practice I would like to ask you what program you use to convert the video with Video image from above to .FLV format, which in practice my problem that I find that image is not very clear when I send the Video from below, sometimes it creates borders for me around blacks, it is in fact this problem should not happen. I kindly ask what program you use to convert and what settings you bri…
Last reply by Kid80, -
- 1 follower
- 8 replies
- 4.3k views
I had HyperSpin running on my old system with Win7. I upgraded my HDD and installed Win10 over the weekend and attempting to follow AV Archvist's How to Install HyperSpin and RocketLauncher video. Unzipped Hyperspin and RocketLauncher and when I execute HyperHQ it looks like it's going to run (I get the timer Orb), then nothing. Looking at Task Manager, nothing is running. I turned Off Real-Time Protection and set all of the folders as Exclusions. Any help would be greatly appreciated.
Last reply by gepet0, -
- 11 replies
- 2.5k views
Hello Everyone, Thank you for taking the time to read this. So, been working on setting up hyperspin over the past few weeks, It really is pretty intense. I am progressing pretty good but i have hit a roadblock. I can seems to get any bezels to load. Default per console or individualized. For now, I'm just focusing on one bezel (just to understand the methodology), 10 yard fight for NES. So far, i have the settings in RLUI as follows -Global- settings-Bezel- enabled set to True - Fullscreen bezel set to fill, use backgrounds set to true In hyperspin folder directory, i have hype hyperspin-media-bezels-Nintendo Entertainment system (same nami…
Last reply by griffin518, -
- 3 replies
- 1.5k views
Hello all, I have been using HyperSpin with HyperHQ for a bit now and would appreciate if someone could help me with some tweaks that would make the experience a lot more enjoyable. I have been using HyperHQ to modify the wheels, but I just can't figure out the following: There is almost no delay from when I land on a game to when the artwork appears. I'd like to have at least a moment to look at the wheel and see what games are in view. Instead I have to keep scrolling to avoid having the artwork pop-in I have the wheel alpha set to 1 so that it is always visible, but is there a way to prevent artwork from covering it? Some games like Killer Instinct 1…
Last reply by ostadler, -
- 2 replies
- 1.9k views
Hi all Its been many years since I delved into the Hyperspin and emulator world, but after being absent, I dug out the old PC that used to host my set up. On boot, I can see that its a Win8.1 Enterprise machine and very outdated! Im going to format it and start afresh, plus update a couple of components in time, but I was interested to see if there is a current set up guide please for Hyperspin? I have all my ROMs and emulators on a separate drive, so Im hoping I can just format and reinstall the OS on the OS drive, then have emulation run smoothly from the other drive that houses ROMs etc. If not, then Im happy to run through a full Hyperspin rebuild (which actu…
Last reply by Harrisonm65, -
- 1 reply
- 3.2k views
After following tutorials, I have hyperspin 1.5.1 and update installed. I have Rocketlauncher and rocketlauncher media installed and have followed the installation tutorials. However, When I click on Hyperspin, does not run. Ideas??
Last reply by Bearzor, -
- 4 replies
- 5.7k views
G'Day Trend Setters, I just completed building a 4 player standup arcade machine with a 43" 4K monitor using all Ultimarc parts. I have configured the machine so each player has 8 buttons, a coin button and player button with this all feeding into an Ultimarc IPAC 4 controller (maxes out the inputs for this board). I also have the Ultimarc trackball set up as a mouse with two mouse buttons. I have attached a picture. I originally was planning only to run MAME so didn't add any extra buttons as I don't like the extra clutter and I normally use a wireless keyboard and mouse. After seeing Hyperspin I purchase a 1T hard drive with Hyerspin and MAME with all …
Last reply by GreedyGuido, -
- 11 replies
- 3.6k views
Hi! I am hoping that someone can help me out, because I 've been looking on the internet and on this site for ages now and I cannot figure it out. I already have all the video's, box art, etc. on my hard drive, but I have literally no clue how I can add these video's /art work and the nice wheel art to my HyperSpin. It seems like a real simple thing to do, but I just don't get it. I tried to do this from within HyperHQ, but then I can only customize some fonts but not add specific video previews? Can someone please help me out? 😄 Thanks in advance Carlo
Last reply by Larsa, -
- 2 replies
- 1.7k views
Going through the C64 guides on youtube and I have winvice launching from Rocketlauncher. The question is now, what is the best wa to get the games into the system and the appropriate rom? I see the version 2.2 database in the system but the ROMS are names something like 2AEC8D1B and not "Summer Games" The rom set I have (c64 dreams) is all the actual names? Any best practices for getting this thing set up with games?
Last reply by eezetee, -
- 15 replies
- 4.9k views
6 years ago I bought a HD and while I knew the basics of setting up systems, downloading ROMs, artwork with hypersync and memberips, it was easier to get it all in one. Fast forward 5 years and a couple of kids later, I'm trying to rebuild my system and i'm finding many components broken... EG. Had to upgrade Hyperspin, trying to use the new MAME with the old ROM's and things are breaking. There is really only about 5-6 systems that I want and I still have the drive with ROM's, movies, artwork. I'm tempted to just start anew and build it the way I know it works. The task is a daunting time sucker though (again), to do the rocketlauncher setup, default EMU…
Last reply by eezetee, -
- 1 follower
- 7 replies
- 1.7k views
What is wrong? I have in rom folder wbfs and iso files. RL can find only wbfs files and no any red game on RL game list. But still all games work outside RL
Last reply by Spawk, -
DONE!!!! --- Admins can lock this thread please Ive created a MAME Game text list on the following link thats missing from the LEDBlinky Colors.ini file. I intend of filling out LEDBlinky with as many games as I can. Just take a quick look at the list, and if you recognize a game and know how many buttons it uses, put the following below the game: B1, B2, B3, B4, B5, B6 etc After I know how many buttons each game uses. Ill create a new Colors.ini after I customize the colors. And add it to LEDBlinky, and share the file here for everybody to get. This is purely a list of ONLY WHAT IS MISSING FROM THE COLO…
Last reply by newoski, -
-
- 2 replies
- 1.6k views
Pretty sure the answer is no but, is it possible to add subwheels to the main wheel that are not systems? I would rather have a wheel menu item that said "Consoles" and have my systems in there instead. It would make for a cleaner wheel. I'd prefer my main wheel to be like this: - Favorites - Sports Games - Gun Games - Arcade Classics - Consoles - Movies - JukeBox - LiveTV Pretty sure this wasn't possible when I joined a few years ago but, thought I'd ask to be sure.
Last reply by adrenachrone, -
- 0 replies
- 1.3k views
Most videos play in their menus but my entire Wii menu does not have any sound except for one game. All videos are formatted in MP4 format. I compared all the videos to the one that works and they are the same codec. Another funny note is that the videos play fine with sound outside of Hyperspin. It is only in Hyperspin I lose the audio. Any help would be appreciated. Thank you. Converting file to FLV works. Everything else works in MP4 format. Downloaded Wii set from EmuMovies. What is going on with MP4's and Hyperspin?
Last reply by boomerps2, -
- 0 replies
- 2.2k views
Hello! Can someone little help my switch project. How i get the switch games for PC? And any tutorial to add all RL? What is the minimum pc specs to run switch? Need games video clips too. Thanks
Last reply by Tinke, -
- 2 followers
- 6 replies
- 2.7k views
@BadBoyBill JOINED - June 30, 2008 LAST VISITED - June 14, 2018 ?
Last reply by Mrmikey73, -
- 2 replies
- 2.5k views
Is the Hyperspin still being worked on? Is there a chance of dual screen display like MAME is capable of? I have two screens and one shows the HS previews while the other shows only MS Windows background. If it also could be rotated individually like MAME allows it to fit Vertically or Horizontally mounted screens that would absolutely awesome.
Last reply by dark13, -
- 0 replies
- 1.2k views
I would like to know what line of code I can add for text2 to be aligned in the center where the middle of the yellow line is Gostaria de saber que linha de códio posso acrescentar para o text2 ficar alinhado no centro onde está o meio da linha amarela [Game Text] game_text_active=true show_year=true show_manf=false show_description=true text_color1=0xff2600 text_color2=0xffd600 stroke_color=0x000000 text_font=Style1 text1_textsize=40 text1_strokesize=7 text1_x=200 text1_y=370 text2_textsize=26 text2_strokesize=8 text2_x=200 text2_y=50
Last reply by villesmall, -
- 1 reply
- 1.4k views
Hey guys, i hadn't used my arcade in a few weeks, i booted it up today and hyperspin was no longer booting up. if run it as admin it just hangs but ui never comes up. I"m guessing it might have been i windows update but i'm not sure.... log is empty, rocketlauncherUi is working fine (had to renable .net 2.0) any tips would be greatly appreciated
Last reply by Losart3d,
-
Popular Contributors
